These impressive columns with their high-gloss black finish have been redeveloped and feature new Klippel-optimized 70 mm mid-range drivers, and a new 19mm mesh tweeter. A meticulously tuned frequency crossover guarantees balanced sound in all frequency ranges above the subwoofer's levels. An uncommon 87 db/w/m degree of efficiency means these speakers sound crisp and loud, even when powered by smaller amplifiers. With 100 watts of maximum capacity, the speakers also hold up under the demands of very powerful AV receivers.
Stable terminals which can easily handle cables up to 4 sqmm in size secure the loudspeaker cable of your choice.
These column speakers are only available as part of this 5.1 set. They are not available separately.
| |
| Speaker |
Continuous power handling (IEC - Long Term) |
60 Watt |
| |
Pulse load capacity (IEC - Short Term) |
100 Watt |
| |
Minimum amplifier output power recommended |
20 Watt |
| |
Impedance |
4 - 8 Ohm |
| |
Frequency range from/to |
120 - 20000 Hz |
| |
Crossover frequency internal switch |
2500 Hz |
| |
Crossover frequency to Woofer (recommended) |
150 Hz |
| |
Tweeter (number) |
1 |
| |
Tweeter (diameter) |
19.00 mm |
| |
Tweeter (material) |
Fabric |
| |
Midrange driver (number) |
2 |
| |
Midrange driver (diameter) |
70.00 mm |
| |
Acoustic principle |
2-way |
| |
Housing structure |
Closed |
| |
Housing material |
ABS plastic |
| |
Housing surface |
Lacquer, glossy |
| |
Net internal volume |
2.30 Litres |
| |
Magnetic shielding |
Yes |
| |
Suitable for banana plug |
Yes |
| |
Maximum cable diameter |
4.00 mm |
| |
Suitable for AV receiver |
Yes |
| |
| Dimensions |
Depth |
22.00 cm |
| |
Width |
30.00 cm |
| |
Height |
108.90 cm |
| |
Weight |
4.60 kg |
These "small" columns can be mounted on walls or placed in shelves or on speaker stands. Acoustically identical to the CL 100 FR columns, they can be used either as front or rear speakers – the same loudspeakers in the same enclosures come into play.
Two newly developed, Klippel-optimised 70 mm mid-range drivers and a new 19 mm mesh tweeter compose the audio foundation of the CL 100 FCR.
A meticulously tuned frequency crossover guarantees balanced sound in all frequency ranges above the subwoofer's levels. An uncommon 87 db/w/m degree of efficiency means these speakers, with 100 watts of maximum capacity, sound crisp and loud and provide high dynamics even in large rooms.
These column speakers are not available separately.
| |
| Speaker |
Continuous power handling (IEC - Long Term) |
60 Watt |
| |
Pulse load capacity (IEC - Short Term) |
100 Watt |
| |
Minimum amplifier output power recommended |
20 Watt |
| |
Impedance |
4 - 8 Ohm |
| |
Frequency range from/to |
120 - 20000 Hz |
| |
Crossover frequency internal switch |
2500 Hz |
| |
Crossover frequency to Woofer (recommended) |
150 Hz |
| |
Tweeter (number) |
1 |
| |
Tweeter (diameter) |
19.00 mm |
| |
Tweeter (material) |
Fabric |
| |
Midrange driver (number) |
2 |
| |
Midrange driver (diameter) |
70.00 mm |
| |
Acoustic principle |
2-way |
| |
Housing structure |
Closed |
| |
Housing material |
ABS plastic |
| |
Housing surface |
Lacquer, glossy |
| |
Net internal volume |
2.30 Litres |
| |
Magnetic shielding |
Yes |
| |
Suitable for banana plug |
Yes |
| |
Maximum cable diameter |
4.00 mm |
| |
Suitable for AV receiver |
Yes |
| |
| Dimensions |
Depth |
8.60 cm |
| |
Width |
16.20 cm |
| |
Height |
35.00 cm |
| |
Weight |
1.40 kg |
This magnetically screened loudspeaker ensures the audibility of the speech in film soundtracks. It should be placed directly under the screen for optimal effectiveness – either by use of its included speaker cradle or using a wall mount.
It delivers harmonious overall sound using the same three loudspeakers and enclosure volume as the CL 100 FR and CL 100 FCR speakers: two new, Klippel-optimised 70 mm mid-range drivers and also a new 19 mm mesh calotte tweeter.
It is not available separately.
| |
| Speaker |
Continuous power handling (IEC - Long Term) |
60 Watt |
| |
Pulse load capacity (IEC - Short Term) |
100 Watt |
| |
Minimum amplifier output power recommended |
20 Watt |
| |
Impedance |
4 - 8 Ohm |
| |
Frequency range from/to |
120 - 20000 Hz |
| |
Crossover frequency internal switch |
2500 Hz |
| |
Crossover frequency to Woofer (recommended) |
150 Hz |
| |
Tweeter (number) |
1 |
| |
Tweeter (diameter) |
19.00 mm |
| |
Tweeter (material) |
Fabric |
| |
Midrange driver (number) |
2 |
| |
Midrange driver (diameter) |
70.00 mm |
| |
Acoustic principle |
2-way |
| |
Housing structure |
Closed |
| |
Housing material |
ABS plastic |
| |
Housing surface |
Lacquer, glossy |
| |
Net internal volume |
2.30 Litres |
| |
Magnetic shielding |
Yes |
| |
Suitable for banana plug |
Yes |
| |
Maximum cable diameter |
4.00 mm |
| |
Suitable for AV receiver |
Yes |
| |
| Dimensions |
Depth |
10.30 cm |
| |
Width |
35.00 cm |
| |
Height |
17.10 cm |
| |
Weight |
1.50 kg |
This subwoofer features a long throw, 200 mm bass driver chassis optimized using the Klippel technique along with a generous, 24 litre enclosure with a bass reflex opening on its side. A newly-developed 100 watt RMS power output delivers incredible bass down to 38 Hz, something otherwise unheard of in its price class.
An internal limiter protects it from overmodulation and distortion. The front control allows for the subwoofer to be turned on immediately, and the sensitivity of its standby mode can be regulated on its rear panel.
Four resonance-dampening feet ensure solid placement and isolate it from the floor. The US 5108/SW comes in black with a glossy black front plate and is only available as part of a set.
| |
| Speaker |
Woofer (diameter) |
200.00 mm |
| |
Woofer (material) |
Cellulose |
| |
Housing structure |
Bass reflex |
| |
Equalisation openings |
1 |
| |
Equalisation openings (pos.) |
Front |
| |
Net internal volume |
24 Litres |
| |
Magnetic shielding |
Yes |
| |
| Connections |
Cinch input |
1 |
| |
| Electronics |
Lowest frequency (-3 dB) |
38 Hz |
| |
Phase control |
on/off, 0 or 180 degrees |
| |
Power output capacity sinus (RMS) Subwoofer |
100 W |
| |
Standby-Function |
Yes |
| |
Standby-Power consumption |
0.37 watt |
| |
Maximum power consumption |
285 watt |
| |
Miscellaneous |
Variable switch - Auto On/Off |
| |
| Dimensions |
Depth |
36.50 cm |
| |
Width |
24.00 cm |
| |
Height |
42.00 cm |
| |
Weight |
12.80 kg |
| |
Miscellaneous |
The height was measured without the stand feet. The height of the stand feet is 12 mm. |