Overview of our technologies
Dieser Aktiv-Subwoofer garantiert nicht nur die Versorgung seines eigenen Tieftöners. Er treibt auch fünf anzuschließende Satelliten-Lautsprecher, die den Klang des Surroundsounds mit ihren Mitten und Höhen gekonnt vollenden, kraftvoll an. So stellt er die gesamte Leistung für ein komplettes 5.1-Lautsprecher-Ensemble zur Verfügung. Ermöglicht wird das durch einen integrierten Class-D-Verstärker für 5.1-Sound, der stattliche 450 Watt Maximalleistung bereithält.
Alles findet Platz in einem großzügigen Gehäuse mit 45 Liter Volumen. So auch das große, klippel-optimierte Langhub-Tieftonchassis mit einem Durchmesser von 250 mm, für das der 5.1-Verstärker alleine 180-Watt-Sinus liefert. Das Resultat: Eine extrem tiefe, kraftvolle, absolut dynamische und unverzerrte Performance. Basswellen bis hinunter auf 30 Hz (-3dB) schafft der US 4110/6 SW ohne Mühe.
Dank geschickter Konstruktion mit zurückgesetzter Endstufe, abgewinkeltem Netzstecker und verdoppelten DPU-Downfire-Reflex-Schlitz kann der Subwoofer wandnah positioniert werden. So steht er fest auf seinen resonanzdämpfenden Standfüßen, entkoppelt vom Fußboden, elegant gestaltet, ohne aufdringlich zu wirken.
- Active-Subwoofer US 4110/6 SW
- Power cable
This subwoofer completes the entire system for a complete 5.1 speaker ensemble - an integrated Class-D amplifier for 5.1 surround sound and a superb 450 Watts of maximum power.
A spacious 45 liter capacity enclosure also holds a Klippel-optimized long-throw woofer with a diameter of 250 mm, for the 5.1 amplifier and 180-watt sine. The result: an extremely deep, powerful, absolutely dynamic and undistorted performance. Creating effortless bass waves down to 30 Hz (-3dB).
At the back all settings and connections are housed discreetly: The terminals for the five satellite speakers and analog 5.1 audio input jacks: Six RCA inputs. This means that the system can be directly connected to a user-friendly control station, station decoder, a 5.1-PC sound card or other audio sources.
Thanks to the smart design with recessed stage, angled plug and doubled DPU down-firing reflex slot, the subwoofer can be positioned close to a wall, making it easy to store. It stands firmly on its resonance damping feet, decoupled from the floor, elegantly designed, without being intrusive. A new focal point in any room – design and function beautifully combined.
Powerful surround sound in a stylish shell - that is the US 4110/6 SW
The US 4110/6 SW is only available as part of a Teufel speaker set.
|Enclosure type||Bass reflex|
|Woofer (number per enclosure)||1|
|Woofer (diameter)||250.00 mm|
|Woofer (material)||Cellulose, coated|
|Miscellaneous||Klippel® measured woofer with long stroke action|
|Enclosure surface||High gloss (front), foil (corpus)|
|Equalisation openings (pos.)||Bottom|
|Removable front cover||Yes|
|Net internal volume||45 Litres|
|Diameter of the stand screw threads||6.00 mm|
Stable MDF house construction with glossy front
Black fabric front cover
|Maximum cable diameter||4.00 mm|
|Suitable for AV receiver||Yes|
|Cinch input 5.1||1|
|High level speaker outputs||5|
|Lowest frequency (-3 dB)||30 Hz|
|Input gain adjustment||Yes|
|Frequency regulator (range)||30 - 70 Hz|
|Phase control||0 - 180°|
|Amplifier technology||Class D|
|Power output capacity impulse (peak) Satellite||50 W|
|Power output capacity impulse (peak) Bass||200 W|
|Power output capacity sinus (RMS) Satellite||40 W|
|Power output capacity sinus (RMS) Bass||180 W|
Active frequency response equalization for seamless AV integration
Realtime Volume Limiter
|Power supply voltage||230 VAC / 50 Hz volts|
|Standby-Power consumption||0.50 watt|
|Maximum power consumption||450 watt|
|Mains cable - IEC connector (non-heating device)||Yes|
|Storage for settings when disconnected||Yes|
|Miscellaneous||Complies with CE, RoHS and REACH requirements|
|Miscellaneous||Resonance-damping stand rubber feet included|
Downloads & support
1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.
A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.
Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.
B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.
- Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable
- If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)
- If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
Tauschen Sie die neben dem Netzschalter befindliche Sicherung aus. Falls die Power-Diode danach nicht leuchtet, wenden Sie sich bitte an unseren Service. Falls die Power-Diode danach leuchtet, aber kein Ton zu vernehmen ist, verfahren Sie bitte wie unter Punkt 2. beschrieben.
2. Falls die Power-Diode leuchtet:
Drehen Sie den Pegelregler Level am Subwoofer auf »Minimum«, ziehen das Subwoofer-Cinchkabel am Verstärker ab, drehen Level vorsichtig hoch und berühren den Cinch-Heißleiter des Cinch-Kabels (innen) mit dem Finger. Ist nun ein Brummen oder Knacken zu hören, liegt der Fehler beim Receiver oder seinen Einstellungen. Bleibt der Subwoofer stumm, wenden Sie sich bitte an unseren Service.
The colours of the outputs and the types of signals transferred at each output differ from sound card to sound card. Please refer to the sound card manual. The Teufel system then reproduces the surround signal decoded by the sound card.
The five satellites are connected directly to the speaker clamps on the subwoofer, using the speaker cable supplied. Strip and split the ends of the speaker cable to do so. Speakers and amplifiers have corresponding [+] and [−] clamps. The [+] cable of the speaker cable is marked with a stripe. It is important to observe the correct polarity when connecting the speakers: the plus pole of the speaker connects to the plus pole of the amplifier and the minus pole of the speaker to the minus pole of the amplifier.
The system is an extremely good-value, fully active system that performs very well for its class. It has been designed for home cinema use in smaller rooms and for PC use. It should be taken into consideration, especially in fully active operation with sound cards and DVD players, that a PC speaker system cannot fill an entire room with sound, only the area where the user is sitting. This system has not been designed for and is not suitable for long-term use at very high volumes.
If the system is operated when the volume is too high, the safety cut-off in the power pack may be activated. This cut-off switch is required for safety reasons and prevents the power pack, the power amplifiers and the speakers from sustaining damage. If this cut-off switch is activated, it means that the system has reached its performance boundaries.
Our problem-solving tips:
• Position the system speakers closer to where you are sitting. Then much less power will be needed for loud sound reproduction.
• Use an AV Receiver that will supply the satellites with power. This takes the pressure off the power pack and the power amplifiers of the system.
However, a fault cannot be ruled out if the system switches off at low volumes in rooms of 20 m² or smaller.
We are unable to authorise additional active cooling of the power amplifier. It no longer corresponds to the specifications for the operation of our products. Failures caused by additional active cooling can clearly be attributed to negligent action by the user. As operation with active cooling has a direct effect on the function of the product, it voids all warranty claims.
The other four inputs on the subwoofer do not need to be occupied (= RCA cable disconnected). With this connection plug arrangement of front In L/R, the Concept E Magnum Power Edition amplifier activates all satellites and the subwoofer through internal distribution. If the subwoofer and all five satellites now play correctly via a directly connected CD player, the Concept E Magnum Power Edition was not receiving the correct signal before. Either the cinch cable is defective (try exchanging it) or the output of your source appliance is not producing the correct signal.
If you continue to experience unwanted noise/individual malfunctions, there is possibly a defect in the Teufel system.
Speakers and amplifiers have corresponding [+] and [−] clamps. The [+] cable of the speaker cable is marked with a stripe. It is important that the polarity of the speakers is identical when they are connected: the positive pole of the speaker connects to the positive pole of the amplifier and the negative pole of the speaker to the negative pole of the amplifier. Connecting the cables with the incorrect phases can result in thin sound, weak bass and reduced stereo characteristics. For multichannel surround systems, it is also important that all speakers are connected with the correct polarity in order to ensure the right three-dimensional atmosphere and the correct alignment of the sound.
If your notebook only has a single 3.5 mm stereo jack output, connect it using a 3.5 mm mini jack cinch Y adapter cable to the front input "In R/L" on the subwoofer.
Thanks to the integrated "Upmix" switch in the Concept E 2/ E Magnum / Motiv 5 / Concept F, the 4 satellite speakers play back a stereo signal and the centre speaker and the subwoofer each play back a mono signal. This admittedly does not sound as perfect as Dolby Digital, but does sound better than pure stereo playback.
You will still have the chance later on to operate your speaker using a convertible external 5.1-capable sound card, in order to experience the full pleasure of Dolby Digital and DTS.
Different companies, such as Creative, Terratec, Toshiba, ESI/Audiotrak and M-Audio, offer solutions for connection to the PCMCIA port or via USB or FireWire.
This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.
A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.