8 week right of return
Up to 12 year guarantee
Free & easy returns
Directly from manufacturer
B2B
My account
  • Consono 35 "5.1-Set"
  • Consono 35 "5.1-Set"
  • Consono 35 "5.1-Set"
  • Consono 35 "5.1-Set"
  • Consono 35 "5.1-Set"
  • Consono 35 "5.1-Set"
  • Consono 35 "5.1-Set"
  • Consono 35 "5.1-Set"
  • Consono 35 "5.1-Set"

Consono 35 "5.1-Set"

Compact 5.1 Home cinema sound system with easy setup & placement options
Home cinema speakers delivering maximum sound
(1)
Consono 35 Mk3 "5.1-Set"
Order the new generation now.
To the new generation
  • 8 week trial
  • Up to 12 year guarantee
  • Free & easy returns

Highlights

Key advantages at a glance
  • Home cinema speakers delivering maximum sound
  • 4 two-way satellite speakers with 2x mid-range drivers
  • 1 two-way center speaker with 2x mid-range drivers
  • 100 watt RMS subwoofer with 250 mm bass driver
  • Works with any standard AV receiver
  • Perfect for spaces up to 30 sqm
What others are saying about us
(5 of 5 from 1 Reviews)
All ratings
The Bass - that much better

Das langhubige, mit Klippel-Messtechnik optimierte 250 mm-Tieftonchassis, ein großzügig dimensioniertes Bassreflex-Gehäuse mit 32 Liter Volumen und eine neue 100 Watt Sinus-Endstufe sorgen für eine in dieser Preisklasse unerreichte Basswiedergabe bis hinab auf 34 Hz. Der interne Limiter schützt vor Übersteuerungen und Verzerrungen.

Ein Frontschalter ermöglicht die direkte Inbetriebnahme. Die Empfindlichkeit des Standby-Modus ist auf der Rückseite regulierbar. Vier Resonanzdämpfer-Füße gewährleisten den sicheren Stand und eine Entkoppelung vom Boden.

Der US 5110/SW mit schwarz glänzender Frontpartie ist nicht separat erhältlich.

Included components

  • Satellite Speaker IP 3000 FR
  • Centre Speaker IP 3000 C
  • Subwoofer US 5110/1 SW

Specifications

Subwoofer US 5110/1 SW
Subwoofer US 5110/1 SW
This long-throw subwoofer in a generously dimensioned, 32 litre bass reflex enclosure features a Klippel-optimised 250 mm bass chassis and 100 watts of RMS output. It delivers bass down to 34 Hz, something otherwise unheard of in its price category. An internal limiter protects it from overmodulation and distortion.

The front control allows for the subwoofer to be turned on immediately, and the sensitivity of its standby mode can be regulated on its rear panel.

Four resonance-dampening feet ensure solid placement and isolate it from the floor. The US 5110/SW is black with a glossy black front plate and is only available as part of a set.
Subwoofer US 5110/1 SW
Speaker
Woofer (diameter) 250.00 mm
Woofer (material) Cellulose
Enclosure type Bass reflex
Net internal volume 32 Litres
Magnetic shielding Yes
Connections
Cinch input 1
Electronics
Lowest frequency (-3 dB) 34 Hz
Phase control on/off, 0 or 180 degrees
Power output capacity sinus (RMS) Bass 100 W
Standby-Function Yes
Standby-Power consumption 0.34 watt
Maximum power consumption 285 watt
Miscellaneous Variable switch - Auto On/Off
Dimensions
Depth 41.00 cm
Width 24.00 cm
Height 49.00 cm
Weight 17 kg
Miscellaneous The height was measured without the stand feet. The height of the stand feet is 12 mm.
Satellite Speaker IP 3000 FR
Satellite Speaker IP 3000 FR
These subtly designed and easily integrated speakers house a 19 mm, high-range dome driver along with doubled power in the mid-ranges (2 x 80mm). This increased amount of membrane surface guarantees potential for higher dynamics and a "rounder" sound.

The speakers radiate sound better than conventionally-constructed ones would thanks to a curved front plate. Enjoy great sound even when not situated in the optimal sitting position. It can be mounted to a wall or directed at the listener's location using the appropriate mount. The IP 3000 FR is only available as part of the Impaq set.
Satellite Speaker IP 3000 FR
Speaker
Continuous power handling (IEC - Long Term) 60 Watt
Peak power capacity (IEC - Short Term) 120 Watt
Sensitivity (2.83 V / 1 m) 88 dB
Impedance 4 Ohm
Crossover frequency internal switch 3400 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 19.00 mm
Tweeter (material) Fabric
Midrange driver (number per enclosure) 2
Midrange driver (diameter) 80.00 mm
Midrange driver (material) Cellulose
Woofer (material) Paper
Acoustic principle 2-way
Enclosure type Closed
Enclosure material Molded ABS
Enclosure surface Glossy
Net internal volume 1.30 Litres
Wall mounting brackets Yes
Magnetic shielding Yes
Terminal clamps Push terminals
Maximum cable diameter 1.50 mm
Dimensions
Depth 9.80 cm
Width 9.00 cm
Height 20.00 cm
Weight 0.80 kg
Centre Speaker IP 3000 C
Centre Speaker IP 3000 C
The IP 3000 C center speaker is the acoustic equivalent of the IP 3000 FR satellite speaker, but is set up for horizontal placement. In addition to its 19 mm high-range dome driver, it incorporates two 80 mm diameter mid-range drivers.

This ensures that human voices are particularly intelligible and faithful to detail, even when the listener isn't sitting in the optimal position (i.e. exactly in the middle). The speaker also radiates sound better thanks to a convex front plate.

The loudspeaker is delivered with a cradle, but can also be mounted on the wall. The IP 3000 C is not offered individually, but only as part of an Impaq 3000 set.
Centre Speaker IP 3000 C
Speaker
Continuous power handling (IEC - Long Term) 60 Watt
Peak power capacity (IEC - Short Term) 120 Watt
Sensitivity (2.83 V / 1 m) 88 dB
Impedance 4 Ohm
Crossover frequency internal switch 3400 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 19.00 mm
Tweeter (material) Fabric
Woofer (number per enclosure) 2
Woofer (diameter) 80.00 mm
Woofer (material) Cellulose
Acoustic principle 2-way
Enclosure type Closed
Enclosure material Molded ABS
Enclosure surface High gloss
Net internal volume 1.30 Litres
Integrated stand Yes
Wall mounting brackets Yes
Magnetic shielding Yes
Terminal clamps Spring clip
Maximum cable diameter 1.50 mm
Dimensions
Depth 9.80 cm
Width 20.00 cm
Height 9.00 cm
Weight 0.80 kg

Expert reviews

Consono 35 "5.1-Set" review of Expert Reviews
Consono 35 "5.1-Set" review of Expert Reviews
"Definitely worth the investment!"
Expert Reviews 08/2011
"You'll get a similar audio experience when watching movies from the less expensive Consono 25, but we think the extra cost is worth the upgrade for anyone looking to outfit a larger room with surround sound. The twin-driver satellites and larger subwoofer can produce more powerful and better balanced audio, which is perfect for both films and music.

Few 5.1 speaker systems cost less than this, and none that we've tested sound as good as this.!
http://www.expertreviews.co.uk/pc-speakers/1286608/teufel-consono-35
Consono 35 "5.1-Set" review of AV Magazin
Consono 35 "5.1-Set" review of AV Magazin Consono 35 "5.1-Set" review of AV Magazin
"Really throws down the gauntlet"
AV Magazin 10/2010
"Bass-heavy explosions are well served by the precision this Teufel subwoofer renders. But mid-to-high range frequencies are also delivered without any bareness. Spoken dialog sounds intelligible and clear. The Consono delivers sovereign renditions of music. [...] Teufel proves that solid home cinema speakers can also be delivered in the low-price segment. Its sound and appointment are outstanding for the price of the set. Anyone looking for a loudspeaker set which delivers the maximum in listening fun for the minimum expense can't disregard a Consono set by Teufel."





Read the whole review here (in German)
How our customers rated this product:

Downloads & support

Help regarding this product
Do I also have a 6.1/7.1 playback for a 5.1 recording?
Usually, all 6.1/7.1 AV Receivers can generate a 6.1/7.1 playback from a 5.1 recording. The procedure is comparable with the Dolby Pro Logic Decoder, which generates a matrix circuit from the stereo signal of a centre channel.

The AV Receivers thus generate a rear centre channel from the rear R/L channels of a 5.1 recording through the matrix circuit. The stronger the rear R/L effects on the DVD, the stronger the signal from the rear centre.
Can I connect the LT 4 directly to a DVD player or PC?
No.

The LT 4 is a partially active system that requires AV receiver operation. It has a built-in amplifier that only supplies bass tones in the subwoofer housing That is why an "AV Receiver", i.e. a combination of radio receiver and multichannel amplifier, is essential for using the LT 4.

The subwoofer is connected from the Line In R input to the AV receiver's sub out jack using a mono RCA cable, while the three front satellites are connected to the three speaker outputs of the AV Receiver using the speaker cable and are supplied with power from there.

Connect signal-emitting source appliances such as DVD player or PC etc. directly to the corresponding input jacks on the AV Receiver.
When would it be worth upgrading my 5.1 system to 6.1/7.1 sound?
Naturally 5.1 channel systems that play back all of the sound tracks contained on the DVDs already offer an excellent home cinema experience.

For the new 6.1 or 7.1 sound formats, a rear centre channel is controlled in addition to these channels. This channel, coded in the stereo effect channels, enables the better positioning of effects and music signals directly behind where you are sitting.

If using two speakers for the rear centre channel, the optimal seating position is not tailored to an individually specified position, i.e. you don't have to be seated in the exact centre.

In the following cases we would recommend upgrading to a 6.1 or 7.1 system:

• Your sitting position is not always dead centre, or you often have several viewers

• You have had a 5.1 system for a very long time and would like an improvement

• Your AV amplifier/receiver is designed as a 6.1 or 7.1 receiver and offers the corresponding connection possibilities

• You can also set up one and/or two rear centres. If you are currently building/renovating your house or flat, we would recommend you lay the cables for the additional rear centre channels in any case.

• Modern BluRay players usually issue a true 7.1 surround sound signal at all digital outputs and are thus optimally suitable - presuming the relevant AV Receiver - as a signal transmitter for a 7.1 channel home cinema system.
How do I upgrade my system to a 6.1 or 7.1 sound format?
The choice of speaker(s) depends on the AV Receiver/amplifier. This has an additional power amplifier for one rear centre (6.1) or its two (7.1). You can easily see this by the wattage (e.g. 6 x 100 watt or 7 x 100 watt). To the existing (side) rear speakers for right/left (5.1 technology), one or two additional rear centres are utilised in addition (6.1 or 7.1 technology).

• My AV amplifier/receiver has six connections/power amplifiers (6.1):

In this case we recommend connecting the same centre at the rear that you also used in the front area.

• My AV amplifier/receiver has 7 connections/power amplifiers (7.1):

If you already use dipoles or direct emitters for your 5.1 system, then you have a choice of either supplementing two more dipoles or two direct emitters. For wall assembly and a short distance from the seating location to the rear wall (less than 1.00 metres), we would recommend dipoles. As soon as you want to set up the speakers on bases or on a shelf, then direct emitters would be the better choice.

Information:
Even if the AV Receiver/amplifier only has the connection and power amplifier performance for one rear centre, it is still possible to connect two instead of just one speaker through series connection.

Exception:
• The AV amplifier/receiver has seven connections/power amplifiers, but I can only set up one rear centre. As the 7.1 AV amplifiers/receiver also offer the option of operating just one of the two outputs (usually can be set in the speaker set-up!), you can also only connect just one rear centre.

Here we recommend connecting the same centre to the rear that you also used in the front area. For short distances to the listening location (less than 1.00 metres), a dipole would be the better choice - especially if you are also using dipoles at the sides.
Is it a problem if the speakers are at different distances to where you are sitting?
Since the distance and volume of every individual speaker can be adjusted for the digital home cinema receivers, asymmetrical set-ups can be easily compensated. 
How do I equalise my home cinema system with the help of a sound level meter?
Take the level meter with you to the listening position and point the measuring device directly towards the front centre speaker. Now start the sound generator of the receiver (or of the sound card or DVD player) and equalise all speakers in succession to the same level.

The position and alignment of the measuring device should not be changed during this procedure. For a Teufel sound level meter, proceed as detailed in the following:

1. Remove the protective tab from the battery.

2. Set the weighting to "A" - only the "A" position considers the full frequency range during measuring!

3. Set the response to Slow.

4. Set the Range to 70.

5. Start the test noise from your AV device.

6. Change the volume for every individual channel at the AV device so that the level meter shows 75 dB (meaning between +4 and +6).

7. Done!
What is the difference between the 5.1 and 7.1 configuration?
Compared with the 5.1 set, the 7.1 set has two extra speakers for the back rear centre channel.

The 5.1 channel set plays back all sound tracks on DVDs/Blu-rays and creates an excellent home cinema experience.

With the 7.1 sound format, a rear centre channel is also generated in addition to these channels and distributed to two further speakers (the "rear centre"). This channel, which is encoded in the stereo effects channels, allows better location of effects and music signals directly behind the sitting position.

If you use two speakers for the rear centre channel (i.e. installed 7.1 set), the optimum sitting position is not restricted to one specific place, so you don't have to be sitting exactly in the middle and several listeners can enjoy the best sound.
Where is the optimal place for the centre of my Lautsprecher Teufel Surround System in a 5.1/6.1/7.1 configuration?
Because the centre plays back spoken dialogue, this speaker must be positioned as centrally as possible under or over the TV/monitor or the screen.

If the centre is placed outside the area of 40 centimetres to 1.20 meter height, it should be slightly inclined or angled towards the listener.


Can I operate the 5.1 set using a 6.1 or 7.1 receiver?
Yes. All Consono systems are suitable for connection to any conventional AV receiver – regardless of whether they are configured for 5.1, 6.1 or 7.1 systems. When connecting a Consono set to a 6.1/7.1 receiver, leave the rear-center terminal(s) unconnected.
Can I use my Consono system to listen to music?
Of course! All of the Consono variants play music from CDs just as well as they play home cinema sound from DVDs. The Consono systems are a top-quality replacement for old stereo speakers.
How do I best set up the Consono's subwoofer?
The Consono subwoofer can be placed anywhere without influencing the set's other loudspeaker. Ideally it is placed on the direct line between the two front satellites. A distance ratio of 1/3 to 2/3 generally brings about good results.
How do I best set up the Consono front satellite speakers?
The front loudspeakers of the Consono sets are best set up based on the traditional stereo model (distance to listener = distance between left and right speaker).

Optional speaker stands or wall mounts are perfect for this task. Using Teufel speaker stands automatically ensures the satellites will be positioned at their optimal height. Wall mounts make it possible to position the speakers vertically or horizontally. When placing the speakers on walls or shelves, the rule of thumb is that a height between 80 centimetres and 1,60 metres should be chosen. If the speakers need to be placed outside of this range, they can also be angled up or down towards the listening position. What's important is that the center and front loudspeakers should be positioned in a straight line or arranged around the television to form a slightly concave line.
Do I absolutely need an AV reciever to use Consono 15, 25 and 35?
Yes.
Which speaker cables does Teufel recommend?
For smaller sets up to Theater 1, we recommend using the 2.5 mm² Teufel speaker cable for optimal sound quality if the required length does not exceed 15 metres.

For Theater 2 and larger systems, we recommend the Teufel cable with 4 mm² cross-section for the front/centre speakers, and the 2.5 mm² cable up to a length of 15 metres for the effect speakers.

Choose a higher cross-section for even greater lengths.
Can I order the Teufel speakers in different colours than those offered?
To realise the very reasonable sales prices usual for Teufel, it is not possible to offer the speakers in a multitude of housing designs.

This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.

A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
Which cables do I need to connect a Teufel speaker set to the AV Receiver?
A home cinema system needs speaker cables to connect the satellite speakers to the receivers, and an NF mono RCA cable to connect the active subwoofer to the sub out socket of the AV Receiver.
Is it possible to combine speaker cables with different cross-sections?
To supplement missing cable lengths you can use speaker cables of differing thicknesses without acoustical differences - provided there are no extreme differences in the cross-sections.
Should I rather choose a fully active or a partially active speaker set?
It is compulsory to connect partially active systems to an AV Receiver. This supplies the five to seven satellite speakers with the necessary power. Only the subwoofer works additionally with its own amplifier. The investment in a new system is higher because of the AV Receiver, but the solution is also much more flexible. After all, you can connect several signal sources, such as a TV, satellite receiver, PC, game console and MP3 player to an AV Receiver at the same time.

Fully active set do not necessarily need an AV Receiver. The five to seven satellite speakers here are supplied with power by the amplifiers which are installed in the subwoofer in addition to the subwoofer power amplifier. This saves you the costs of a receiver, but it is usually only possible to connect one source to our fully active subwoofer.

Exceptions here are the Concept E2, the Concept E Magnum Digital, the Motiv 5 Digital, the Concept F, the LT2+R and the Concept S+R.

Naturally you can also equip the fully active systems with an AV Receiver at a later point. The connection is then equal to the partially active sets.
Can I set up the set in a different way to that described?
The recommended set-up information below represents the best possible arrangement for perfect multichannel playback in your home. Your available space, your partner or your furniture may not always allow you to arrange the speakers in the ideal manner. Try to meet as many of the requirements as possible.

Modern AV Receivers offer numerous options for compensating electronically for any compromises in the set up. Generally speaking, the following rule always applies: you can always use our recommendations as a basis for experimenting with what works best for you, acoustically and optically. Let your ears (and eyes) decide!
My subwoofer is humming. What can I do?
This hum can be caused by the connected devices or disruptions in your electricity current. Please do a test to see which it is.

1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.

A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.

Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.

B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.

  • Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable

  • If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)

  • If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
Cookies are used on our website
In order to provide the best possible service and to offer relevant advertisements, we use functional, analytical and advertising cookies, as well as similar technologies provided by Teufel Audio or third parties, on our site. For more information, please see our Privacy Policy and Cookie Guidelines, where you can manage your cookie settings and opt-out. By clicking the X symbol, or by continuing to use this website (for example, by clicking a link on the site), you consent to the use of these cookies.