8 week right of return
Up to 12 year guarantee
Free & easy returns
Directly from manufacturer
B2B
My account
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"
  • Columa 250 Digital "5.1-Set L"

Central A | Columa 250 "5.1-Set L"

Complete surround sound system for flawless sound
Complete 5.1-channel home theater system
Columa 300 Impaq "5.1-Set L"
Order the new generation now.
To the new generation
  • 8 week trial
  • Up to 12 year guarantee
  • Free & easy returns

Highlights

Key advantages at a glance
  • Complete 5.1-channel home theater system
  • Plug-and-play: no extra AV receiver is required
  • Compact audio control system with amazing connection possibilities

  • Integrated 5.1 amplifier means you don't have to buy any additional devices

  • Set L: 4 tall column speakers, 1 centre speaker, 1 subwoofer, 1 audio control unit
Features

Overview of our technologies

PC Gaming
PC/Multimedia
Dolby
dts Digital Entertainment
Downfire
Dolby Pro Logic II
Floating columns

The semi-transparent column speakers of the Columa 250 are the ideal playmates for your TV. The five satellites of the set appear strikingly airy through the glass elements used. However, the acoustics are always housed in dedicated enclosures.

Harmonic sound
The quality high and low midrange driver of Teufel are responsible for the pure joy of this set: all satellites, including the center are equipped with two matching 70 mm drivers and a 19 mm fabric tweeter. The identical design ensures an extremely homogenous sound - with fantastic detail.

Ruling it all with pure sound
This system is so powerfully equipped, it's designed to fill rooms of up to 25 sqm with powerful sound. But this set can also be used in smaller rooms if needed, without overpowering the area.

Subwoofer US 2108/6 SW

The active Subwoofer US 2108/6 SW comes in 24 liter housing and weighs 14 kg is an indispensable part of the set for optimal cinema surround sound in your home.

The compact size means the subwoofer takes up little space. Despite its slim shape the subwoofer still incorporates the powerful and large 200 mm woofer, allowing the US 2108/6 SW to perform to a much higher standard than others in the same price range. Thanks to an amplifier with 100 watts of power, the US 2108/6 SW bass that goes down to an incredible 45-Hz. The internal limiter protects the subwoofer from overload and distortion.
At the back there is a phase switch and sockets for direct connection of the surround speakers. And on the back you can easily connect the Decoder or the Control Station 5 mark 2.

Optically, the US 2108/6 SW is timeless and perfect for any living room. With its sleek and discreet shapes with modern gloss and rounded corners, this subwoofer fits into any living room. The bass reflex port at the bottom and the special notch on the back of the housing ensure seamless positioning against most walls. Four resonators ensure stable positioning and decoupling from the floor.

Subwoofer US 2108/6 SW - Front
Subwoofer US 2108/6 SW - Back
Universal Subwoofer US 2108/6 SW - Bottom

Der Subwoofer wird mit drei Klinke-Cinch-Kabeln mit der 5.1-Soundkarte oder dem Media-PC verbunden. Wenn nur die beiden Frontkanäle verbunden sind, wird die integrierte Schaltung des Teufel-Systems aktiv, die den Ton über alle Satelliten und den Subwoofer ausgibt.

Die genaue Belegung der Ausgänge deiner Soundkarte kannst du aus dem Handbuch entnehmen. Das Set ist bis auf die Verbindungs- und Lautsprecherkabel sofort spielbereit. Sollte deine Soundkarte nur über digitale Ausgänge verfügen, benötigst du zusätzlich eine DecoderStation.

Wie eine Soundkarte den Computer-Klang beeinflusst
DecoderStation 5 Mk2

Compact rig out
This ultra-compact device works as a controller for each active 5.1 speaker set from Teufel. A subwoofer with an integrated 6-channel amplifier is with 5 speaker output make the Decoder Station 5 Mk 2 a complete multimedia sound system for any type of home entertainment - without AV receiver or amplifier.

Connect it all
The system can support up to eight external devices with a 5.1-speaker set, all you have to do is select between devices without the hassle of swapping cables. Four digital and four analog inputs are available for different applications: computer, laptop, DVD player, games console, TV, DVB-T/S/C, MP3 players, iPod dock, tablets, and media streamers - everything goes.

Surround sound all in one
The Decoder Station 5 Mk2 supports Dolby / DTS for amazing surround sound. The station also enhances conventional stereo signals to give you a surround sound experience that includes all five speakers plus a subwoofer.

Lip sync extrordinaire
The new Lip Sync button adjusts any delay during conversion, so that sound and image are always in sync.

Flexible as you want it
The decoder station can be combined with a variety of 5.1 speaker sets across different formats and offers adjustable crossover frequencies in the range 80 - 250 Hz to give you the best possible sound.

Keep control
A 32-character display keeps you informed about the status of each function. A multi-functional remote control is also included.

What more do you need?
The Decoder Station 5 Mk2 lets you kit out your home entertainment system with a fully active 5.1 speaker set without needing an extra AV receiver. All in all, this baby gives you a compact surround sound system with really vicious sound.

Included components

  • Column Speaker CL 250 FR (pc.)
  • Center Speaker CL 250 C
  • Active-Subwoofer US 2108/6 SW
  • Power supply for Decoderstation 5 Mk2
  • Remote Control Decoderstation 5 RC Mk2
  • DecoderStation 5 Mk2 Steuergerät
  • 30m Speaker Cable 1.0mm² - C1030S
  • RCA-Cable 3.0 m C7030A

Specifications

Column Speaker CL 250 FR (pc.)
Column Speaker CL 250 FR (pc.)
Die volle Virtuosität des Designs des Columa 250 wirkt besonders bei den 122,5cm hohen Standsäulen. Zwischen zwei schmalen Aluminiumprofilen befindet sich die Lautsprechereinheit mit den drei Chassis, die zwischen zwei Glasscheiben förmlich zu schweben scheint. Ein auf das Säulen-Design optimierter Standfuß gibt unauffällig festen Halt und unterstützt so die Leichtigkeit der Lautsprecher.

Ausgestattet sind die magnetisch abgeschirmten Säulen mit jeweils zwei klippel-optimierten 70-mm-Tiefmitteltönern aus Zellulose und einem 19-mm-Hochtöner aus Gewebe mit Neodym-Magnet. Die Höhe von über 1,20m ist optimal auf eine reguläre Sitzhöhe der Zuhörer angepasst.

Dadurch kann ein dynamisches, klares und homogenes Klangbild erzeugt werden. Das ausgewogene Abstrahlverhalten erlaubt auch außerhalb des idealen Sitzplatzes ein volles Sounderlebnis. So klingen die Col 250 FR nicht nur beeindruckend, sie lassen sich auch unkompliziert in Ihr Wohnkonzept integrieren.
Column Speaker CL 250 FR (pc.)
Speaker
Continuous power handling (IEC - Long Term) 60 Watt
Peak power capacity (IEC - Short Term) 100 Watt
Sensitivity (2.83 V / 1 m) 85 dB
Minimum amplifier output power recommended 20 Watt
Maximum sound pressure level 97 dB/1m
Impedance 4 - 8 Ohm
Frequency range from/to 120 - 20000 Hz
Crossover frequency internal switch 2800 Hz
Crossover frequency to Woofer (recommended) 150 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 19.00 mm
Tweeter (material) Fabric
Bass/Midrange driver (number per enclosure) 2
Bass/Midrange driver (diameter) 70.00 mm
Bass/Midrange driver (material) Cellulose, coated
Acoustic principle 2-way
Enclosure type Closed
Enclosure material Plastic + glass
Enclosure surface Lacquer,matte + glass
Removable front cover Yes
Net internal volume 2.70 Litres
Integrated stand Yes
Magnetic shielding Yes
Terminal clamps Screw terminals
Maximum cable diameter 2.50 mm
Suitable for AV receiver Yes
Dimensions
Depth 7.20 cm
Width 15.00 cm
Height 122.50 cm
Weight 6.75 kg
Center speaker CL 250 C
Center speaker CL 250 C
The center speaker in its landscape format is the equal to the column speakers, having identical kit inside. The two midrange drivers and tweeter are set back in their glass housing as well. This is how we keep the design of this system fresh and looking bright while providing fantastic speech intelligibility.

The CL 250 C is designed for two separate setup possibilities: either you set it on the shelf or you mount it directly to the wall by the integrated wall mount.
Center speaker CL 250 C
Speaker
Continuous power handling (IEC - Long Term) 60 Watt
Peak power capacity (IEC - Short Term) 100 Watt
Sensitivity (2.83 V / 1 m) 85 dB
Minimum amplifier output power recommended 20 Watt
Maximum sound pressure level 97 dB/1m
Impedance 4 - 8 Ohm
Frequency range from/to 120 - 20000 Hz
Crossover frequency internal switch 2400 Hz
Crossover frequency to Woofer (recommended) 150 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 19.00 mm
Tweeter (material) Gewebe
Bass/Midrange driver (number per enclosure) 1
Bass/Midrange driver (diameter) 70.00 mm
Bass/Midrange driver (material) Zellulose, beschichtet
Acoustic principle 2-way
Enclosure type Closed
Enclosure material Plastic + glass
Enclosure surface Lacquer, matte + glass
Removable front cover Yes
Wall mounting brackets Yes
Keyhole plate mounted Yes
Magnetic shielding Yes
Terminal clamps Screw terminals
Maximum cable diameter 2.50 mm
Suitable for AV receiver Yes
Dimensions
Depth 7.20 cm
Width 50.00 cm
Height 15.00 cm
Weight 2 kg
Active-Subwoofer US 2108/6 SW
Active-Subwoofer US 2108/6 SW
The active Subwoofer US 2108/6 SW comes in 24 liter housing and weighs 14 kg is an indispensable part of the set for optimal cinema surround sound in your home.
The compact size means the subwoofer takes up little space. Despite its slim shape the subwoofer still incorporates the powerful and large 200 mm woofer, allowing the US 2108/6 SW to perform to a much higher standard than others in the same price range. Thanks to an amplifier with 100 watts of power, the US 2108/6 SW bass that goes down to an incredible 45-Hz. The internal limiter protects the subwoofer from overload and distortion.
At the back there is a phase switch and sockets for direct connection of the surround speakers. And on the back you can easily connect the Decoder or the Control Station 5 mark 2.
Optically, the US 2108/6 SW is timeless and perfect for any living room. With its sleek and discreet shapes with modern gloss and rounded corners, this subwoofer fits into any living room. The bass reflex port at the bottom and the special notch on the back of the housing ensure seamless positioning against most walls. Four resonators ensure stable positioning and decoupling from the floor.
The US 2108/6 SW is only sold as part of a Teufel set and cannot be ordered separately.
Active-Subwoofer US 2108/6 SW
Speaker
Acoustic principle 1-Way-System
Downfire Yes
Enclosure type Bass reflex
Woofer (number per enclosure) 1
Woofer (diameter) 200.00 mm
Woofer (material) Cellulose, coated
Miscellaneous Klippel® measured woofer with long stroke action
Enclosure material MDF
Enclosure surface High gloss (front), foil (corpus)
Equalisation openings 1
Equalisation openings (pos.) Bottom
Net internal volume 24 Litres
Integrated stand Yes
Magnetic shielding Yes
Miscellaneous Stabile MDF house construction with glossy accents
Bass reflex channel with DPU technology prevents flow noise
Terminal clamps Push terminals
Maximum cable diameter 4.00 mm
Connections
Cinch input 5.1 1
High level speaker outputs 5
Electronics
Lowest frequency (-3 dB) 40 Hz
Bass boost/EQ Yes
Input gain adjustment Yes
Level control Yes
Amplifier technology Class-AB + Class-D
Amplifier configuration 5.1
Amplifier channels 6
Power output capacity impulse (peak) Satellite 25 W
Power output capacity impulse (peak) Bass 125 W
Power output capacity sinus (RMS) Satellite 20 W
Power output capacity sinus (RMS) Bass 100 W
Miscellaneous Potent power supply
Power supply voltage 230 volts
Standby-Function Yes
Standby-Function Yes
Standby-Power consumption 0.50 watt
Maximum power consumption 450 watt
Mains cable - IEC connector (non-heating device) Yes
Safety class 2
Fuse Yes
Storage for settings when disconnected Yes
Automatic on/off Yes
Miscellaneous Complies with CE, RoHS and REACH requirements
Dimensions
Depth 28.00 cm
Width 28.00 cm
Height 50.00 cm
Weight 13.95 kg
Miscellaneous Resonance damping rubber stand feet included
Decoderstation 5 Mk2
Decoderstation 5 Mk2
This ultra compact control device serves as a preamp for a 5.1-powered subwoofer. The Decoder Station Mk2 offers four digital (optical and 2x 2 x coaxial) inputs plus four stereo analog inputs (1 x 5.1, 1 x stereo). These are located on the back of the device and are suitable for the connection of many different devices. The integrated decoder for DTS, Dolby Digital, Dolby Pro Logic ensures perfect surround sound for many playback devices.

With the extra Lip Sync option you ensure that video and audio are played simultaneously. The Decoder Station is compatible with many different types of speakers in the frequency range of 80-250 Hz. The included remote control gives you access to all the devices that you have connected the decoder Station Mk2.
Decoderstation 5 Mk2
Connections
Digital inputs coaxial 2
Digital inputs optical 2
Cinch input stereo 3
Cinch input 5.1 1
Cinch output 5.1 1
Playback
DTS NEO:6 Yes
Dolby Digital Yes
DTS Yes
Miscellaneous multichannel audio
Dolby Pro Logic Yes
Dolby Pro Logic II Yes
Electronics
Power supply voltage 100 - 230 volts
Standby-Function Yes
Standby-Power consumption 0.50 watt
Storage for settings when disconnected Yes
Automatic on/off Yes
Integrated DSP Yes
Remote control Infrared
Dimensions
Depth 15.00 cm
Width 23.50 cm
Height 5.40 cm
Weight 1.01 kg

Downloads & support

Help regarding this product
Can I order the Teufel speakers in different colours than those offered?
To realise the very reasonable sales prices usual for Teufel, it is not possible to offer the speakers in a multitude of housing designs.

This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.

A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
Which cables do I need to connect a Teufel speaker set to the AV Receiver?
A home cinema system needs speaker cables to connect the satellite speakers to the receivers, and an NF mono RCA cable to connect the active subwoofer to the sub out socket of the AV Receiver.
When can I use the rear speakers as direct speakers?
If you aren't able to position the speakers close to the wall as described above, you should use the them as direct speakers. For this purpose the rear switch should be tipped outwards. For use as direct speakers, the rear boxes should be set up to the left and right of the listening position - ideally at the same height, e.g. on a shelf or preferably on a base. If the speakers have to be set up so that they are much higher or lower, it may be advisable to align them to the listening point. For wall mounting it is best to use wall brackets that allow for vertical movement. When using the speakers in direct speaker mode, we recommend that the distance between the two rear speakers exceeds the listening position by 1m. But if you (have to) sit closer, please make sure that the front of the speaker is not pointing directly at you; instead, angle the speakers more into the room.
My subwoofer is humming. What can I do?
This hum can be caused by the connected devices or disruptions in your electricity current. Please do a test to see which it is.

1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.

A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.

Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.

B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.

  • Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable

  • If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)

  • If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
Der Subwoofer spielt nicht – was kann ich tun?
1. Falls die Power-Diode nicht leuchtet:
Tauschen Sie die neben dem Netzschalter befindliche Sicherung aus. Falls die Power-Diode danach nicht leuchtet, wenden Sie sich bitte an unseren Service. Falls die Power-Diode danach leuchtet, aber kein Ton zu vernehmen ist, verfahren Sie bitte wie unter Punkt 2. beschrieben.

2. Falls die Power-Diode leuchtet:
Drehen Sie den Pegelregler Level am Subwoofer auf »Minimum«, ziehen das Subwoofer-Cinchkabel am Verstärker ab, drehen Level vorsichtig hoch und berühren den Cinch-Heißleiter des Cinch-Kabels (innen) mit dem Finger. Ist nun ein Brummen oder Knacken zu hören, liegt der Fehler beim Receiver oder seinen Einstellungen. Bleibt der Subwoofer stumm, wenden Sie sich bitte an unseren Service.
How do I connect my fully active Teufel system to a multi-channel sound card?
If your sound card is set up for 5.1 operation, you will usually find three 3.5 mm mini jack outputs. Connect the card using three Y adapter cables in the 3.5 mm mini jacks to 2 x cinch formats to the inputs for the front R/L, rear R/L, centre and subwoofer at the rear of the fully active Teufel set.

The colours of the outputs and the types of signals transferred at each output differ from sound card to sound card. Please refer to the sound card manual. The Teufel system then reproduces the surround signal decoded by the sound card.

The five satellites are connected directly to the speaker clamps on the subwoofer, using the speaker cable supplied. Strip and split the ends of the speaker cable to do so. Speakers and amplifiers have corresponding [+] and [−] clamps. The [+] cable of the speaker cable is marked with a stripe. It is important to observe the correct polarity when connecting the speakers: the plus pole of the speaker connects to the plus pole of the amplifier and the minus pole of the speaker to the minus pole of the amplifier.
The subwoofer switches itself off after a long period at high volume (the satellites keep playing).
It is possible that you have operated the system outside of its performance boundaries.

The system is an extremely good-value, fully active system that performs very well for its class. It has been designed for home cinema use in smaller rooms and for PC use. It should be taken into consideration, especially in fully active operation with sound cards and DVD players, that a PC speaker system cannot fill an entire room with sound, only the area where the user is sitting. This system has not been designed for and is not suitable for long-term use at very high volumes.

If the system is operated when the volume is too high, the safety cut-off in the power pack may be activated. This cut-off switch is required for safety reasons and prevents the power pack, the power amplifiers and the speakers from sustaining damage. If this cut-off switch is activated, it means that the system has reached its performance boundaries.

Our problem-solving tips:

• Position the system speakers closer to where you are sitting. Then much less power will be needed for loud sound reproduction.

• Use an AV Receiver that will supply the satellites with power. This takes the pressure off the power pack and the power amplifiers of the system.

However, a fault cannot be ruled out if the system switches off at low volumes in rooms of 20 m² or smaller.

We are unable to authorise additional active cooling of the power amplifier. It no longer corresponds to the specifications for the operation of our products. Failures caused by additional active cooling can clearly be attributed to negligent action by the user. As operation with active cooling has a direct effect on the function of the product, it voids all warranty claims.
One satellite speaker generates no sound or distorted sound, but the other one works fine. Why?
In order to more precisely identify the problem, please try swapping the channel positions of the two satellite speakers. It should be possible to find out if the problem is a defective satellite speaker, or if it has to do with the electronics of the amplifier. If the satellite speaker functions after the swap, then the electronics of the amplifier may be defective. If not, the satellite speaker is likely broken.
There is no sound coming from either the speakers or the subwoofer
Please check that the operating lights of your Teufel device are on. If not, please change the fuse: it could be that the mains fuse on the subwoofer may have blown due to overvoltage in the mains. The fuse box is located underneath the plug. Use a small screwdriver to lever it out, replace the two jammed fuses and insert the fuse holder back into the fuse box. Now the subwoofer should be ready for use again.
Basic function test.
You can check the function of the subwoofer and the satellites by only connecting the (stereo) signal from an external source that is guaranteed to be good quality, such as a music CD played on a (portable) CD player, using a RCA cable (and possibly a Y adapter) with the front input L/R on the subwoofer.

The other four inputs on the subwoofer do not need to be occupied (= RCA cable disconnected). With this connection plug arrangement of front In L/R, the Concept E Magnum Power Edition amplifier activates all satellites and the subwoofer through internal distribution. If the subwoofer and all five satellites now play correctly via a directly connected CD player, the Concept E Magnum Power Edition was not receiving the correct signal before. Either the cinch cable is defective (try exchanging it) or the output of your source appliance is not producing the correct signal.

If you continue to experience unwanted noise/individual malfunctions, there is possibly a defect in the Teufel system.
How do I connect the five satellites to the Motiv 5?
The five satellites are connected directly to the speaker clamps on the subwoofer, using a normal speaker cable. We recommend using the speaker cable from the MO 500 W accessories package. Separate the ends of the speaker cable and remove the insulation.

Speakers and amplifiers have corresponding [+] and [−] clamps. The [+] cable of the speaker cable is marked with a stripe. It is important that the polarity of the speakers is identical when they are connected: the positive pole of the speaker connects to the positive pole of the amplifier and the negative pole of the speaker to the negative pole of the amplifier. Connecting the cables with the incorrect phases can result in thin sound, weak bass and reduced stereo characteristics. For multichannel surround systems, it is also important that all speakers are connected with the correct polarity in order to ensure the right three-dimensional atmosphere and the correct alignment of the sound.
How do I connect my fully active Teufel system to a notebook?
You can use our fully active sets to create perfect PC sound, not only on a desktop computer but also with a notebook.

If your notebook only has a single 3.5 mm stereo jack output, connect it using a 3.5 mm mini jack cinch Y adapter cable to the front input "In R/L" on the subwoofer.
Thanks to the integrated "Upmix" switch in the Concept E 2/ E Magnum / Motiv 5 / Concept F, the 4 satellite speakers play back a stereo signal and the centre speaker and the subwoofer each play back a mono signal. This admittedly does not sound as perfect as Dolby Digital, but does sound better than pure stereo playback.

You will still have the chance later on to operate your speaker using a convertible external 5.1-capable sound card, in order to experience the full pleasure of Dolby Digital and DTS.

Different companies, such as Creative, Terratec, Toshiba, ESI/Audiotrak and M-Audio, offer solutions for connection to the PCMCIA port or via USB or FireWire.
My subwoofer that's connected to the Decoderstation 5 has no bass signal. What should I do?
Turn on the Decoderstation 5. Go tot he main menu by pressing the dial knob once that's located at the front of the device. Choose "Speaker size" off the menu. Set the speaker size to "SSS+Sub". For more information, see page 18 in the user manual.
Connecting your digital computer - how do we do that?
Connect the digital output of your sound card using an optical or coaxial cable (depending on the digital format of your card) tot he respective optical or coaxial input on your Decoderstation 5.

Some notebooks and sound cards have routed your digital output to the customary mini-cinch output. Software installed on your PC has been configured to switch the signal. If this is the case, you will need a special cable.

The digital connection guarantees interference-free 5.1 surround-sound playback. These instructions apply to notebooks as well as desktop computers.
Connecting Sat receiver/Premiere decoder/DVB-T receiver - how do I do that?
Let the receiver produce crystal-clear digital sound using its digital outputs. Digital Out to Digital In. Done!

If your TV receiver does not have a digital output, you can still connect both analogue outputs (Audio Out L/R) with one of the three analogue stereo input pairs on the Decoderstation 5.

Thanks to the Teufel decoder's Dolby ProLogic matrix, you can still enjoy real impressive surround-sound. Better than stereo, and far better than mono!
Meine Decoderstation 5 reagiert nicht bzw. arbeitet ungenau. Was kann ich tun?
1. Schalten Sie die Decoderstation 5 in den standby-Modus.
2. Schalten Sie die Decoderstation 5 ein und drücken sowie halten Sie sofort die Return-Taste.
3. Die Meldung "restore factory settings" erscheint im Display.
4. Bestätigen Sie die Meldung mit einem Druck auf den Drehregler.
Warum muss ich für den Dolby ProLogic II Movie-Modus die Entfernung für die Surround-Kanäle separat einstellen?
Dolby fordert in diesem Modus eine Mindestverzögerungszeit von 10 Millisekunden für die Surround-Kanäle - das entspricht umgerechnet einem Mindestabstand von -3,3 Meter. Als Folge können nur Werte oberhalb dieser Schwelle eingegeben werden. Daher wird das Surround-Delay für diesen Modus separat gespeichert um bei allen anderen Decodier-Modi den korrekten Abstand (ohne Mindestverzögerungszeit) einstellen zu können.
Are all delay settings the same for all Dolby Digital/dts playback modes?
The configuration settings for an optimal playback quality apply to all following modes except for Dolby ProLogic II Movie (see pages 14-18 of the handbook).

Why do the distances for the surround-sound channels have to be separately set for the Dolby ProLogic II Movie mode?

For this mode, Dolby requires a minimum delay time of 10 milliseconds for the surround-sound channels. This is equivalent to a minimum distance of 3.3 metres. Consequently, only values higher than this threshold can be set. For this reason, the surround-sound delay configurations for this mode are made separately, so that the correct distance (without minimum delay time) can be set for the other decoding modes.
Connecting your gaming console - how do I do that?
Now you can generate an authentic 5.1 sound from your Xbox or PlayStation, as long as your model has digital outputs. Use a digital cable to connect the console's digital out to the Decoderstation 5's in, using the appropriate optical or coaxial cable.

From now on, you will even be able to hear the enemy fighter approaching you from behind!
Do surround signals have to be decoded before they reach the decoderstation 3?
No. As already indicated in the product description, the decoderstation has integrated decoders for common surround sound systems, e.g. Dolby Digital / dts and can supply a fully active home cinema audio system with surround signals without any additional components.
Cookies are used on our website
In order to provide the best possible service and to offer relevant advertisements, we use functional, analytical and advertising cookies, as well as similar technologies provided by Teufel Audio or third parties, on our site. For more information, please see our Privacy Policy and Cookie Guidelines, where you can manage your cookie settings and opt-out. By clicking the X symbol, or by continuing to use this website (for example, by clicking a link on the site), you consent to the use of these cookies.