8 week right of return
Free & easy returns
Directly from manufacturer
My account
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L
  • Cinepaq 6300 Power Edition Set L

Cinepaq 6300 Power Edition Set L

5.1 Home cinema system group with DVD receiver and ultra-narrow column loudspeakers
Complete 5.1 home cinema and music system
Columa 300 Impaq "5.1-Set L"
Order the new generation now.
To the new generation
  • 8 week trial
  • Directly from manufacturer
  • Free & easy returns


Key advantages at a glance
  • Complete 5.1 home cinema and music system
  • Slender column speakers
  • Set L: 4 column speakers, 1 centre, 1 subwoofer
  • 250 watt RMS subwoofer with one 300mm bass driver
  • 5 x 80 watt AM/FM receiver with audio and video connections including HDMI
  • Recommended for spaces up to 40 sqm

Overview of our technologies

PC Gaming
dts Digital Entertainment
Dolby Pro Logic II

With the Cinepaq 6300 you immediately have a complete surround assortment – a group that works perfectly together with all cables included, immediately ready for you to play. A smarter DVD receiver works with an equally elegant, super slim speaker. And all with elán- the motto always stays the same: The best sound with the best price!

The components
In this assortment we’re combining the aluminium loudspeakers of the LT 3 with the CP 5100 DR DVD Receiver and the AC 3025 WS cable set. When buying as a set you save an amazing € 216,90!

The controller
The CP 5100 DR connects the functionality of a 5.1 amplifier with an integrated decoder, AM/FM radio and DVD player for the usual formats in a uniquely harmonic system grouping. Extra flat thanks to space-saving Class D technology.

The amplifier
With a hefty 80 watts of performance per channel with Class D technology, the CP 5100 DR gives the LT 3 system more than enough reserves to make your ears ring in a room of up to 35 sqm. The integrated Dolby Digital/DTS decoder guarantees an equally authentic 5.1 or stereo playback.

The Radio
The RDS tuner stores 30 AM/FM spots. Channel changing is easy thanks to the remote control – as well as many other functions.

The DVD player
The integrated player plays DVD videos, DVD audio, and CDs. It reads Dolby Digital/DTS data as well as MP3s and WMA files – in short: a variety of popular image and sound formats. The powerful video scaler makes each image format an optimal resolution. Maximum: 1080p.

The inputs
Next to the modern HDMI ports (Vers. 1.3a) there are also Scart-, S-video- component and composite jacks available for input and output. Four digital (coaxial and optic) allow porting of other players. The CP 5100 DR handles audio data from MP3 players or sticks through the USB stick.

The loudspeakers
You receive an amazing HiFi quality from the extremely flat aluminium columns, made possible from the 2.5-way technology with four mid-drivers and a complete tweeter. Identical drivers in all five boxes guarantee a harmonious total surround sound.

The subwoofer
A huge 250 mm driver, hefty 200 watt amplifier, appropriate volume in a compact form – these aspects deliver sound for rooms up to 35 sqm.

The System
The Cinepaq 6300 allows you the freedom of a complete A/V multichannel system for the modern sitting room that is combined with outstanding sound. Which is also perfect as an accompaniment to the modern flatscreen. Uncomplicated to handle. Everything’s there. And you’ll also save a hefty amount of money…

The CP 5100 DR, a 5.1 receiver par excellence, delivers a total control center with integrated everything for those wanting to rig out their Teufel set with a little something ... extra. It doesn't matter which set, either - the CP 5100 plays perfectly with them all!

Total Control
Enjoy 5.1 amplifier functionality, an integrated surround decoder, AM/FM radio and a DVD player in this harmonic unit. Next to HDMI ports, there's also Scart-, S-video- component and composite jacks available for input and output. Four digital (coaxial and optic) allow porting, thus handling audio data from MP3 players or USB sticks.

The Amplifier
With 80 watts of performance per channel with Class D tech and flexible bass management for the different speaker types, you're definitely assured of extra performance with this handly little receiver. The integrated decoder deftly delivers Dolby Digital/DTS signals for authentic surround 5.1 playback. Stereo's not forgotten, either - Dolby Prologic II technology handles both your music and your headphones with aplomb.

The Radio and DVD
The tuner stores 30 spots, with name display thanks to RDS (Radio Data System) technology. The integrated player plays DVD, DVD audio, and CDs. It reads Dolby Digital/DTS data as well as MP3s and WMA files – in short: a variety of popular image and sound formats. The powerful video scaler ensures optimal resolution with a max of 1080p.
Tried, true, and now with extra bass

The set is equally suited to music or home cinema sound reproduction - one system is all you need. The four columns each contain large midbass drivers that allow them to do full justice to movie soundtracks.

Two of the four drivers in each column are dedicated to the midrange while the lowest drivers take care of the bass – a neat technological feature of this system. The advantage of this arrangement is a reduction in propagation time differences compared to standard loudspeaker constructions.

The LT 3 Power Edition has been harmoniously tuned for exceptional playback with all kinds of source material. The slightly curved front grille enables a very even dispersion for an enjoyable experience even outside of an ideal listening position.

Included components

  • DVD Receiver CP 5100 DR
  • Remote Control for CP 5100 DR
  • Column Speaker L 330 FR (pc.)
  • Centre Speaker L 330 C
  • Subwoofer L 4200 SW
  • 30m Speaker Cable 1.0mm² - C1030S
  • Subwoofer-Cable 2.5m - C3525W


Subwoofer L 4200 SW
Subwoofer L 4200 SW
Thanks to the 300 mm woofer in gorgeous housing, the bass reflex and impressive 350 watts of pure performance, the L 4200 SW brings even the largest of living rooms into a more than satisfied listening area.

For an optimal adaption for the acoustics and the satellites, a continuous stream of between 40 and 240 Hertz is sent directly to the device. A lateral positioning is available thanks to the switchable phase position.
Subwoofer L 4200 SW
Frequency range from/to 35-200 Hz
Woofer (number per enclosure) 1
Woofer (diameter) 300.00 mm
Enclosure type Bass reflex
Enclosure material MDF
Equalisation openings 2
Equalisation openings (pos.) Back
Spikes prepared Yes
Magnetic shielding Yes
Terminal clamps Screw terminals
Cinch input stereo 2
Input gain adjustment Yes
Frequency regulator (range) 40-240 Hz
Full Range/Low Pass switch Yes
Level control Analogue
Phase control Analogue
Amplifier technology Digital
Power output capacity impulse (peak) Bass 350 W
Power output capacity sinus (RMS) Bass 250 W
Depth 54.00 cm
Width 34.50 cm
Height 48.80 cm
Weight 23.20 kg
DVD Receiver CP 5100 DR
DVD Receiver CP 5100 DR
5.1 Receiver with integrated DVD player AM/FM. RDS. HDMI. Upscaling to 1080p. 12 video ports. 8 audio inputs including USB.
DVD Receiver CP 5100 DR
Maximum cable diameter 4.00 mm
Digital inputs coaxial 2
Digital inputs optical 2
Cinch input stereo 3
Bass driver output 1
Headphone output 3,5mm 1
Video inputs- HDMI 2
Video inputs- HDMI Yes
Video outputs - HDMI 1
Video outputs - HDMI Yes
Video inputs- composite 2
Video inputs- components 1
Video inputs- S-Video 2
Video outputs- composite Yes
Video outputs- composite 1
Video outputs- components Yes
Video outputs- components 1
Video outputs- Scart Yes
Video outputs- Scart 1
Video outputs- S-Video Yes
Video outputs- S-Video 1
USB 2.0 USB-Stick up to 2GB - Audio
Dolby Digital Yes
MP2 Yes
MP3 Yes
Miscellaneous MP3 pro
Dolby Pro Logic II Yes
Dolby Pro Logic II Movie, Music, Game
Dolby Virtual Speaker Yes
Miscellaneous DSP Presets
Xvid Yes
CD-Audio Yes
DVD-Video Yes
Kodak Photo-CD Yes
CD Yes
CD-R Yes
Progressive Scan Yes
Convert composite -> component Yes
Convert composite -> S-Video Yes
Convert S-Video -> composite Yes
Miscellaneous Component -> Composite
S-Video -> HDMI
Composite -> HDMI
Component -> HDMI
DVD - country code 2
Device type DVD Receiver
Radio present Yes
Station memory positions 2 x 30
FM - UKW Yes
AM - MW Yes
Remote control Yes
Amplifier type Class D
Amplifier channels 6
Power output capacity sinus (RMS) Satellite 80 W
Power supply voltage 230 volts
Standby-Function Yes
Standby-Power consumption 1 watt
Maximum power consumption 200 watt
Storage for settings when disconnected Yes
Display Yes
OSD Multilingual
Depth 35.50 cm
Width 43.00 cm
Height 8.10 cm
Weight 5.90 kg
Column Speaker L 330 FR (pc.)
Column Speaker L 330 FR (pc.)
Elegant and needlelike, these 10 cm wide column speakers lend their 1,10 metres of height to the LT 3 PE for a stately impression. They are housed in a solid aluminum body which doesn't just look good, but also ensures optimal acoustic conditions.

Four 80 mm cone speakers deliver low and mid-range frequencies: two spring into action at an ideal crossover frequency of 120 hertz (as fixed by the home cinema receiver), guaranteeing a homogenous and distortion-free delivery of all mid-range frequencies.

A 25 mm mesh calotte comes into play above 3000 Hz in delivering high and very high frequencies.

A base plate with a 25 cm diameter ensures stable footing.
Column Speaker L 330 FR (pc.)
Continuous power handling (IEC - Long Term) 100 Watt
Peak power capacity (IEC - Short Term) 160 Watt
Minimum amplifier output power recommended 50 Watt
Impedance 4-8 Ohm
Frequency range from/to 120-20000 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 25.00 mm
Bass/Midrange driver (number per enclosure) 4
Bass/Midrange driver (diameter) 80.00 mm
Acoustic principle 2.5-way
Enclosure type Closed
Enclosure material Aluminium
Enclosure surface Aluminium
Integrated stand Yes
Magnetic shielding Yes
Terminal clamps Screw terminals
Suitable for banana plug Yes
Maximum cable diameter 4.00 mm
Suitable for AV receiver Yes
Base plate - diameter 25.00 cm
Material Glass
Adjustment is possible no
Depth 10.90 cm
Width 10.30 cm
Height 112.00 cm
Weight 5.50 kg
Centre Speaker L 330 C
Centre Speaker L 330 C
As is customary with Teufel systems, the LT 3's center speaker is configured with the same loudspeakers and enclosure as the column speakers are. This guarantees homogenous surround sound. And thanks to the extremely slim nature of this horizontal speaker (just 10 cm high!), the L 330 C can be placed underneath a television without being in the way. It is 45 cm wide.

The L 330 C includes integrated wall mounts and is delivered with a table stand.
Centre Speaker L 330 C
Continuous power handling (IEC - Long Term) 100 Watt
Peak power capacity (IEC - Short Term) 160 Watt
Minimum amplifier output power recommended 50 Watt
Impedance 4-8 Ohm
Frequency range from/to 120-20000 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 25.00 mm
Bass/Midrange driver (number per enclosure) 4
Bass/Midrange driver (diameter) 80.00 mm
Acoustic principle 2.5-way
Enclosure type Closed
Enclosure material Aluminium
Enclosure surface Aluminium
Integrated stand Yes
Wall mounting brackets Yes
Magnetic shielding Yes
Terminal clamps Screw terminals
Suitable for banana plug Yes
Maximum cable diameter 4.00 mm
Suitable for AV receiver Yes
Depth 10.90 cm
Width 45.00 cm
Height 10.40 cm
Weight 2.10 kg

Expert reviews

Cinepaq 6300 Power Edition Set L review of Heimkino
Cinepaq 6300 Power Edition Set L review of Heimkino
"Posh Boxes."
Heimkino 07/2009

We knew we'd like the LT 3 home theatre system from the first look at its elegant design and the amazing worksmanship. But it's not only visually brilliant, this 5.1 set.

The system rolls with a powerful and bombastic sound performance through your home theatre, raising up some real emotion and inevitably causing evenings in your future to play out the same way. Those that own a convenient chair, a popcorn machine and the LT 3 will consider themselves good to go!

• Sound (70%) 1,1
• Dynamics/Vibrancy15% 1,1
• Deep bass properties 15% 1,2
• Tone balance 10% 1,2
• Detail resolution 10% 1,0
• Co-operation 10% 1,0
• Listening area centre 10% 1,3
• Labor (15%) 1,1
• Frequency response5% 1,1
• Distortion5% 1,2
• Stability levels 5% 1,1
• Practice (15%) 1,1
• Worksmanship 5% 1,1
• Equipment 5% 1,2
• Operating instructions 5% 1,1

• Wonderful design
• Excellent sound
• Powerful Subwoofer
• Price/Performance: excellent

Test results: Phenomenal ( 1,1 )

Cinepaq 6300 Power Edition Set L review of Digital Tested Cinepaq 6300 Power Edition Set L review of Digital Tested
"5.1 Incredibly streamlined."
Digital Tested 03/2009

As you know, one can spend a fortune on a good sound system. But you don’t have to. We've tested the new LT3 set from Berlin for customers just like you: All in all, LT3 stands for an excellent, compact movie set designed for small to medium-sized rooms. It's destined to top many of its competitors in its price range.

• Music playback: good (39 / 50)
• Film playback quality: good (23.5 / 30)
• Engineering and Workmanship: very good (8.5 / 10)
• User-friendliness: excellent (9 / 10)
• Chic, compact columns
• Wide sound range
• Price/Performance: GOOD (80/100)

Total rating: GOOD (80/100)

Downloads & support

Help regarding this product
Can I order the Teufel speakers in different colours than those offered?
To realise the very reasonable sales prices usual for Teufel, it is not possible to offer the speakers in a multitude of housing designs.

This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.

A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
My subwoofer is humming. What can I do?
This hum can be caused by the connected devices or disruptions in your electricity current. Please do a test to see which it is.

1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.

A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.

Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.

B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.

  • Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable

  • If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)

  • If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
Can the LT 4 replace a stereo system?

The LT 4 is equally well suited to music reproduction and cinema sound. It can completely replace any standing stereo speakers. As a result of careful development of the satellites, especially by using midtone speakers of sufficient dimensions, we can guarantee stereo sound comparable with much more expensive (and, above all, bulkier) standing speakers.
Will an active subwoofer only run in 5.1 mode or also in stereo mode?
Thanks to the speaker set-up/bass management integrated in the home cinema receivers/amplifiers, the subwoofer functions in stereo, Dolby Surround and digital mode.

The corresponding setting in the speaker set-up must be adjusted individually for each source for many receivers, however, e.g. for CD playback only front without woofer, and front speakers plus woofer for Dolby Surround video playback.
Why doesn't my active subwoofer switch on automatically?
Some AV Receivers/amplifiers issue the bass signals via the subwoofer pre-amplifier output so quietly that the subwoofer does not start automatically.

To make sure the subwoofer switches on and off correctly in automatic mode, (to be selected on the corresponding switch of the subwoofer, such as "Auto / On / Off"), we recommend turning the level control on the subwoofer to 1/3 or perhaps to 1/2 and increasing the output level for the sub in the receiver's speaker set-up – sometimes up to the maximum (+10 dB or +12 dB). The subwoofer should then work perfectly.

The maximum position of the output level in the speaker set-up of the AV Receiver is obligatory for some of our models (e.g. the Concept S subwoofer).
How do I connect my fully active Teufel system to an AV Receiver?
Although designed to be fully active, the Teufel set is also partially active in conjunction with an AV Receiver.

You can connect it like a standard speaker system: the five satellites via speaker cable to the corresponding speaker outputs front R/L, rear R/L and centre of the AV Receiver/amplifier and the subwoofer from the front R input via a mono-RCA cable to the Sub Out output on the A/V Receiver/amplifier.

Please note:
The auto on/standby switch only responds when the front R input is being used! The subwoofer also receives the full subwoofer signal via this channel.

If the AV Receiver/amplifier has preamplifier outputs for all channels (front R/L, rear R/L, centre and subwoofer), the Teufel set can also be connected via three RCA cable pairs to the subwoofer and the satellites via speaker cables to the subwoofer. However, we recommend using the first version.
What is a ground hum?
The hum (50 Hz) comes from the 220 volt supply network and is caused by current power flows through the protective conductor. These so-called "ground hums" is caused when you connect two devices that are already grounded on the protective conductor (subwoofer) or the antennae cable (AV Receiver) to the subwoofer cable.

Separate the direct connection by a grounding filter for the antennae cable that is created for it - for instance, the Teufel modell sheath current filter AC 9022 ED. Alternatively, you can use a galvanic separation filter that is looped into the connection between the subwoofer and AV Receiver.

The hum disappears if the antennae cable is separated from the Receiver/Tuner/TV. First try the grounding filter, otherwise the galvanic separation filter.
Where is the optimal place for the subwoofer of my Lautsprecher Teufel Surround System in a 5.1/6.1/7.1 configuration?
The location of a subwoofer with a recommended cut-off frequency of under/equal to 120 Hz can be freely selected and does not affect the other speakers.

Placement within the straight line between both front satellites is ideal - but not precisely in the corner of the room because certain frequency components could be unpleasantly excessive when played back.
How do I determine the right phase setting of the subwoofer?
By setting the phase, you can affect the point at which the membrane of the subwoofer bass speaker moves to the front. This setting makes it possible to optimally adjust the subwoofer to the satellites.

The membranes of the satellites should move to the front at the same time as the membrane of the subwoofer bass speaker, because all speakers of the system must vibrate in phase for optimal playback. This means that (provided the connection has the correct polarity) all drivers must move in one direction when the three front speakers receive a pulse (towards the outside or towards the inside).

If the subwoofer is in line with the front speakers, its bass speaker should have the same direction of movement (phase) - the controller on the woofer is set to "0". If the subwoofer is not between the front speakers, but is to the side of or even behind the listening location, its phase length will not match that of the front speakers. That is why the phase of the subwoofer must be changed in such cases.

So much for the theory. In practice, this means: Listen to a loud piece of music with heavy basses and ask a second person to change the phase during playback. The correct setting of the phase switch depends on where the subwoofer is positioned in the room. The position where the bass playback (above all the upper bass range) sounds the fullest is the correct position. Have fun trying it out!
What is the use of the on/off automatic switch ("Auto On/Off") of the active subwoofer?
The On/Off switch is a power-saving standby switch. The switch must be set to "On" or "1" to activate the standby. The subwoofer is activated as soon as it receives a strong bass signal. After approx. ten to twenty minutes of no signal, or only after receiving a very weak signal, it automatically switches to the standby function.

Even though the LED is still illuminated, the subwoofer is in standby mode. This function can be easily checked by slowly increasing the volume at the receiver/amplifier. You will hear a quiet popping noise when the subwoofer activates itself as of a certain level.
What happens to the power amplifiers of the subwoofer if I don't connect the satellites?
As soon as the satellites are connected to the subwoofer and not to the AV Receiver/amplifier, the performance of the 6 or 8-channel power amplifier is distributed to the subwoofer and to the satellites.

If the satellites are not connected directly to the subwoofer but to the AV Receiver/amplifier via speaker cable instead, the subwoofer performance will increase somewhat; the power amplifiers for the satellites have no function. This enables the subwoofer and satellites to play even more dynamically than if the subwoofer still had to provide the satellites with performance.

The technical background: The subwoofer has a large transformer with a specific wattage. This performance is either distributed to the five satellites and the subwoofer, or you receive a higher performance only for the subwoofer.
How can I connect an additional active subwoofer?
If your receiver has only one subwoofer output ("Sub Out"), you only need a monocinch cable, which is then connected from the receiver to the "Sub In" of the subwoofer. With two subwoofer outputs, you can order a so-called Y-adapter from the Teufel accessories page, which has a cinch plug on one side and two cinch (RCA) sockets on the other. Connect the plug to the subwoofer "Pre Out" on the AV receiver/amplifier and connect the mono cinch cable to the two subwoofers.

If the cabling method is easier for you, then you can alternatively connect one subwoofer to the other. You will need two mono cinch cables - one to connect the subwoofer "Pre Out" on the AV receiver/amplifier to the left line-in input of the first subwoofer, and the other to connect the left line-out output of the first subwoofer to the left line-in input of the second subwoofer.
What's the deal with the so-called bass traps or bass absorbers?
These are usually cubic wood housings (same MDF material as the speakers) with a bass reflex opening that have no membranes and are tuned to a certain frequency (e.g. 40 Hz as for a subwoofer). The frequency to be co-ordinated can be changed by the length and diametre of the bass reflex channel. If, for example, a room has a room resonance frequency of 28.3 Hz and this frequency is also played back in addition by a speaker/subwoofer, the room will begin to resonate at this frequency. This particular frequency is played back amplified.

This can be imagined as droning or booming, which occurs during heavy bass movie scenes such as explosions or certain types of music (Jazz, pizzicato bass). The bass absorber is then tuned exactly to this frequency so that only the speakers/subwoofer play back this frequency. The resonance frequency from the room, which would amplify this frequency, is swallowed by the bass absorber.

If you would like to damp more than one frequency (a room usually has three different frequencies: ceilings and floors, front and back and left and right, and its multiple), you will have to set up three absorbers accordingly.
How is the wattage of a subwoofer with respect to the sine wave and pulse/music performance?
Mono subwoofer:

The wattage (e.g. "360 W") printed on the rear of the subwoofer near the mains plug designates the ability of the power amplifier "to pull" a maximum power rating in the specified range at the moment of switching on (those 360 watt stated as an example).

Consequently, the wattage must correspond to at least the sine wave output of the amplifier, as this sine wave output must be permanently available which the power pack must provide as well.

The pulse/music performance of the amplifier, on the other hand, can exceed the wattage, because the short pulses are buffered additionally by the capacitors in the power pack and are not achieved solely through the performance of the power pack.

Multi-channel subwoofer:

The wattage for a multi-channel subwoofer can also be below the sine wave output, as the specified sine wave output is not requested from every channel at the same time.

For a 5 x 100 watt sinus power amplifier, for example, each of the five channels is able to implement 100 watt sine. However, not all five channels at the same time! This is also unnecessary, as the same signal is never transmitted across all five channels at the same time, thus requesting the same high sine wave output per channel.

That is why the wattage may be, e.g. 300 watt, even if the sine wave output exhibits 5 x 100 watt (= 500 watt).
What are the volume switches for?
The sound of the speaker always depends on the room where it is located.

The volume of the active subwoofer can be controlled so that you can adapt the relationship between the active bass and treble / mid tones to suit the room.

Use your own senses to judge which settings sound best in your room. This switch is especially useful in stereo mode. On the other hand, multichannel amplifiers often have technologies that adjust the subwoofer volume - so when using a multichannel amplifier the controller should first be set at 0dB.
Which subwoofer cables does Teufel recommend?
Dans la mesure où dans un ensemble home cinéma les caissons de basses actifs sont connectés à la sortie Out du caisson de basses du récepteur AV, un câble supplémentaire pour la connexion des enceintes satellites est nécessaire. Pour les caissons de basses actifs nous proposons deux versions de câble mono RCA NF allant de 2,5m jusque 5m. Du reste, un adaptateur Y est également disponible dans nos accessoires. Le modèle „ 2 x mâles 1 x femelle“ permet un usage complet des entrées Line-In RCA droit et gauche au caisson de basses. Ainsi, la puissance du caisson de basses s’en voit augmentée. Le modèle „1 x mâle 2 x femelles“ permet la connexion de deux caissons de basses. Une sortie caisson de basses Pre-Out du récepteur se trouve en sommes doublée.
What is room resonance frequency?
Room resonance frequency (other terms: room modes, standing waves, resonance frequency) is the frequency at which the vibrations of a voice, a musical instrument or a signal played back over the hi-fi/home cinema system is amplified unnaturally, because the vibrations build up between the walls as well as the floor and ceiling.

It is calculated of the sound velocity divided by 2 and divided by the room length [ 340 m/s: 2 : 6 m = 28.3 Hz (=1/s) ] or, more simply: 170 divided by the room dimension (length, width or height). The greatest distance between two parallel walls is taken as first standard value. For a room of 4 x 6 metres, this would be 6 metres. Strictly speaking, you would have to calculate the room resonance frequency for further parallel walls (for the 4 metres and for the ceiling height).

Overlaying resonances are also possible if the room dimensions are very close to each other. (2.8 metres high, 3 metres wide and 5.6 metres long). The resonance at 2.8 metres is repeated as multiple (times 2) at 5.6 metres length, the resonance of the 3 metres width is close to the resonance of 2.8 metres. It would resonate strongly here at 30 Hz, 56 Hz, 60 Hz and 120/112 Hz.

Phenomena of resonance frequencies:

• For example, a man with a deep voice speaks in a very small room (2 by 2 metres, 85 Hz). The voice appears to have more emphasis than in another room or out of doors. As soon as a woman speaks, the voice will sound just the same as in another room.

• The voice of a woman or that of a small child will cause glass to shatter. The voice strikes exactly the tone that corresponds to the resonant frequency of the glass. The glass resonates so strongly that it shatters (refer to the movie "The Tin Drum").

• A group of soldiers march across a bridge in cadence. The equal movement causes the bridge to vibrate so much that it collapses. That is why no one marches across bridges in cadence.
Gibt es zum CP 5100 DR entsprechende Software-Updates?
Software-Updates zu unseren Produkten finden Sie auf unserer Software-Update-Seite.
Cookies are used on our website
In order to provide the best possible service and to offer relevant advertisements, we use functional, analytical and advertising cookies, as well as similar technologies provided by Teufel Audio or third parties, on our site. For more information, please see our Privacy Policy and Cookie Guidelines, where you can manage your cookie settings and opt-out. By clicking the X symbol, or by continuing to use this website (for example, by clicking a link on the site), you consent to the use of these cookies.