8 week right of return
Up to 12 year guarantee
Free & easy returns
Directly from manufacturer
B2B
My account
  • Columa 200
  • Columa 200
  • Columa 200
  • Columa 200
  • Columa 200
  • Columa 200
  • Columa 200

Columa 200

Slim column speaker set in walnut
Slim column set – perfect for home cinema and music
Columa 300 Mk2 "5.1-Set L"
Order the new generation now.
To the new generation
  • 8 week trial
  • Up to 12 year guarantee
  • Free & easy returns

Highlights

Key advantages at a glance
  • Slim column set – perfect for home cinema and music
  • Minimalist, timeless design for seamless room integration
  • Identical drivers for all speakers
  • Subwoofer with 150 watt amp and 250 mm woofer
  • Works with every AV receiver
  • Recommended for rooms up to 30 sqm

Sharp form – clear sound
Teufel shows with the Columa 200 that there’s no need to differentiate between a great sounding system and a great looking one. These slim columns integrate seamlessly into every living room situation and are ideal sound solutions for those wishing for simultaneously good home cinema and music.

Pure exterior – maximum interior
The column speakers are kitted out with extremely high quality midrange drivers. When these combine with the 19mm tweeters, you receive crystal clear playback. The centre speaker hast he identical drivers to the others, so you’re set with a natural, surround sound-filling experience that delivers even the softest voice perfectly clear.

Beautiful yet practical design
The Columa 200 can be set up as it comes out of the box – without further accessories such as stand feet or wall mounts needed. The columns have a very stable stand which doesn’t detract from their placement within the room. The centre can be set on a TV stand, a shelf, or mounted on a wall.

Experience your sound
The Columa 200 is your ticket to a reverberatingly good sound wherever you need it.

Included components

  • Centre Speaker CL 200 C
  • Column Speaker CL 200 FR (pc.)
  • Column Speaker CL 200 FR (pc.)
  • Subwoofer T 800 SW

Specifications

Subwoofer T 800 SW
Subwoofer T 800 SW
The technical fittings for this model are impressive, especially for this price range: a 150 Watt Class D output power amplifier, side-mounted 250 mm woofers contained in a bass-reflex diaphargm size of almost 30 liters. The result is a powerful bass, up to 38 Hz (-3dB).


Subwoofer T 800 SW
Speaker
Maximum sound pressure level 100 dB/1m
Bass/Midrange driver (diameter) 250.00 mm
Enclosure type Bass reflex
Enclosure material MDF
Enclosure surface Foil
Equalisation openings 1
Equalisation openings (pos.) Front
Net internal volume 29.10 Litres
Electronics
Level control Yes
Output performance amplifier: Bass driver 150 W
Standby-Function Yes
Dimensions
Depth 40.00 cm
Width 26.00 cm
Height 40.00 cm
Weight 15 kg
Column Speaker CL 200 FR (pc.)
Column Speaker CL 200 FR (pc.)
The column speakers are set up with two newly developed, klippel-optimised 70 mm midrange drivers and a 19 mm tweeter. These fantastic speakers guarantee dead-natural sound playback in ranges above the subwoofer. Thanks tot he extra care we’ve used in developing this set, even lower-than average costing AV receivers make this set sing. Cables up to 4 qmm in diameter can be attached via the stable banana plugs provided. All column speakers are magnetically shielded.
Column Speaker CL 200 FR (pc.)
Speaker
Peak power capacity (IEC - Short Term) 70 Watt
Maximum sound pressure level 100 dB/1m
Impedance 4 - 8 Ohm
Frequency range from/to 100 - 20.000 Hz
Crossover frequency to Woofer (recommended) 150 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 19.00 mm
Tweeter (material) Cellulose, coated
Bass/Midrange driver (number per enclosure) 2
Bass/Midrange driver (diameter) 70.00 mm
Bass/Midrange driver (material) Cellulose, coated
Acoustic principle 2-way
Enclosure type Closed
Enclosure material MDF
Enclosure surface Foil
Net internal volume 8.40 Litres
Integrated stand Yes
Keyhole plate mounted Yes
Magnetic shielding Yes
Miscellaneous Bananenstecker-tauglich
Dimensions
Depth 24.00 cm
Width 24.00 cm
Height 111.00 cm
Weight 4.70 kg
Centre Speaker CL 200 C
Centre Speaker CL 200 C
The magnetically shielded centre speaker in landscape format delivers the same two klippel optimised 70 mm midrange drivers and 19 mm tweeter for clean and simultaneous speech delivery. This speaker is positioned over the TV or integrated directly onto the wall. Cables up to 4 qmm in diameter can be attached via the stable banana plugs provided.
Centre Speaker CL 200 C
Speaker
Peak power capacity (IEC - Short Term) 70 Watt
Maximum sound pressure level 100 dB/1m
Impedance 4 - 8 Ohm
Frequency range from/to 100 - 20.000 Hz
Crossover frequency internal switch 150 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 19.00 mm
Tweeter (material) Cellulose, coated
Bass/Midrange driver (number per enclosure) 2
Bass/Midrange driver (diameter) 70.00 mm
Bass/Midrange driver (material) Cellulose, coated
Acoustic principle 2-way
Enclosure type Closed
Enclosure material MDF
Enclosure surface Foil
Removable front cover Yes
Net internal volume 3.20 Litres
Integrated stand Yes
Keyhole plate mounted Yes
Miscellaneous Bananenstecker-tauglich
Dimensions
Depth 7.70 cm
Width 39.50 cm
Height 11.90 cm
Weight 1.80 kg

Expert reviews

"Incredibly stylish - a shrewd investment"
Expert Reviews Ultimate 08/2011
"It's immediately clear that Teufel's Columa 200 is a set of speakers to be proud of. The angular design, wood-grain finish and high-quality construction all ooze class. You'll definitely want to keep them on display rather than hide them among your furniture.

If you're after a set of quality speakers that can match fantastic audio with superb styling, the Columa 200 is difficult to beat. With excellent sound, gorgeous looks and a confidence-inspiring twelve-year warranty, it's well worth the asking price."

Downloads & support

Help regarding this product
Do I also have a 6.1/7.1 playback for a 5.1 recording?
Usually, all 6.1/7.1 AV Receivers can generate a 6.1/7.1 playback from a 5.1 recording. The procedure is comparable with the Dolby Pro Logic Decoder, which generates a matrix circuit from the stereo signal of a centre channel.

The AV Receivers thus generate a rear centre channel from the rear R/L channels of a 5.1 recording through the matrix circuit. The stronger the rear R/L effects on the DVD, the stronger the signal from the rear centre.
Can I connect the LT 4 directly to a DVD player or PC?
No.

The LT 4 is a partially active system that requires AV receiver operation. It has a built-in amplifier that only supplies bass tones in the subwoofer housing That is why an "AV Receiver", i.e. a combination of radio receiver and multichannel amplifier, is essential for using the LT 4.

The subwoofer is connected from the Line In R input to the AV receiver's sub out jack using a mono RCA cable, while the three front satellites are connected to the three speaker outputs of the AV Receiver using the speaker cable and are supplied with power from there.

Connect signal-emitting source appliances such as DVD player or PC etc. directly to the corresponding input jacks on the AV Receiver.
When would it be worth upgrading my 5.1 system to 6.1/7.1 sound?
Naturally 5.1 channel systems that play back all of the sound tracks contained on the DVDs already offer an excellent home cinema experience.

For the new 6.1 or 7.1 sound formats, a rear centre channel is controlled in addition to these channels. This channel, coded in the stereo effect channels, enables the better positioning of effects and music signals directly behind where you are sitting.

If using two speakers for the rear centre channel, the optimal seating position is not tailored to an individually specified position, i.e. you don't have to be seated in the exact centre.

In the following cases we would recommend upgrading to a 6.1 or 7.1 system:

• Your sitting position is not always dead centre, or you often have several viewers

• You have had a 5.1 system for a very long time and would like an improvement

• Your AV amplifier/receiver is designed as a 6.1 or 7.1 receiver and offers the corresponding connection possibilities

• You can also set up one and/or two rear centres. If you are currently building/renovating your house or flat, we would recommend you lay the cables for the additional rear centre channels in any case.

• Modern BluRay players usually issue a true 7.1 surround sound signal at all digital outputs and are thus optimally suitable - presuming the relevant AV Receiver - as a signal transmitter for a 7.1 channel home cinema system.
How do I upgrade my system to a 6.1 or 7.1 sound format?
The choice of speaker(s) depends on the AV Receiver/amplifier. This has an additional power amplifier for one rear centre (6.1) or its two (7.1). You can easily see this by the wattage (e.g. 6 x 100 watt or 7 x 100 watt). To the existing (side) rear speakers for right/left (5.1 technology), one or two additional rear centres are utilised in addition (6.1 or 7.1 technology).

• My AV amplifier/receiver has six connections/power amplifiers (6.1):

In this case we recommend connecting the same centre at the rear that you also used in the front area.

• My AV amplifier/receiver has 7 connections/power amplifiers (7.1):

If you already use dipoles or direct emitters for your 5.1 system, then you have a choice of either supplementing two more dipoles or two direct emitters. For wall assembly and a short distance from the seating location to the rear wall (less than 1.00 metres), we would recommend dipoles. As soon as you want to set up the speakers on bases or on a shelf, then direct emitters would be the better choice.

Information:
Even if the AV Receiver/amplifier only has the connection and power amplifier performance for one rear centre, it is still possible to connect two instead of just one speaker through series connection.

Exception:
• The AV amplifier/receiver has seven connections/power amplifiers, but I can only set up one rear centre. As the 7.1 AV amplifiers/receiver also offer the option of operating just one of the two outputs (usually can be set in the speaker set-up!), you can also only connect just one rear centre.

Here we recommend connecting the same centre to the rear that you also used in the front area. For short distances to the listening location (less than 1.00 metres), a dipole would be the better choice - especially if you are also using dipoles at the sides.
Is it a problem if the speakers are at different distances to where you are sitting?
Since the distance and volume of every individual speaker can be adjusted for the digital home cinema receivers, asymmetrical set-ups can be easily compensated. 
How do I equalise my home cinema system with the help of a sound level meter?
Take the level meter with you to the listening position and point the measuring device directly towards the front centre speaker. Now start the sound generator of the receiver (or of the sound card or DVD player) and equalise all speakers in succession to the same level.

The position and alignment of the measuring device should not be changed during this procedure. For a Teufel sound level meter, proceed as detailed in the following:

1. Remove the protective tab from the battery.

2. Set the weighting to "A" - only the "A" position considers the full frequency range during measuring!

3. Set the response to Slow.

4. Set the Range to 70.

5. Start the test noise from your AV device.

6. Change the volume for every individual channel at the AV device so that the level meter shows 75 dB (meaning between +4 and +6).

7. Done!
What is the difference between the 5.1 and 7.1 configuration?
Compared with the 5.1 set, the 7.1 set has two extra speakers for the back rear centre channel.

The 5.1 channel set plays back all sound tracks on DVDs/Blu-rays and creates an excellent home cinema experience.

With the 7.1 sound format, a rear centre channel is also generated in addition to these channels and distributed to two further speakers (the "rear centre"). This channel, which is encoded in the stereo effects channels, allows better location of effects and music signals directly behind the sitting position.

If you use two speakers for the rear centre channel (i.e. installed 7.1 set), the optimum sitting position is not restricted to one specific place, so you don't have to be sitting exactly in the middle and several listeners can enjoy the best sound.
Where is the optimal place for the centre of my Lautsprecher Teufel Surround System in a 5.1/6.1/7.1 configuration?
Because the centre plays back spoken dialogue, this speaker must be positioned as centrally as possible under or over the TV/monitor or the screen.

If the centre is placed outside the area of 40 centimetres to 1.20 meter height, it should be slightly inclined or angled towards the listener.


Which speaker cables does Teufel recommend?
For smaller sets up to Theater 1, we recommend using the 2.5 mm² Teufel speaker cable for optimal sound quality if the required length does not exceed 15 metres.

For Theater 2 and larger systems, we recommend the Teufel cable with 4 mm² cross-section for the front/centre speakers, and the 2.5 mm² cable up to a length of 15 metres for the effect speakers.

Choose a higher cross-section for even greater lengths.
Can I order the Teufel speakers in different colours than those offered?
To realise the very reasonable sales prices usual for Teufel, it is not possible to offer the speakers in a multitude of housing designs.

This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.

A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
Which cables do I need to connect a Teufel speaker set to the AV Receiver?
A home cinema system needs speaker cables to connect the satellite speakers to the receivers, and an NF mono RCA cable to connect the active subwoofer to the sub out socket of the AV Receiver.
Is it possible to combine speaker cables with different cross-sections?
To supplement missing cable lengths you can use speaker cables of differing thicknesses without acoustical differences - provided there are no extreme differences in the cross-sections.
Should I rather choose a fully active or a partially active speaker set?
It is compulsory to connect partially active systems to an AV Receiver. This supplies the five to seven satellite speakers with the necessary power. Only the subwoofer works additionally with its own amplifier. The investment in a new system is higher because of the AV Receiver, but the solution is also much more flexible. After all, you can connect several signal sources, such as a TV, satellite receiver, PC, game console and MP3 player to an AV Receiver at the same time.

Fully active set do not necessarily need an AV Receiver. The five to seven satellite speakers here are supplied with power by the amplifiers which are installed in the subwoofer in addition to the subwoofer power amplifier. This saves you the costs of a receiver, but it is usually only possible to connect one source to our fully active subwoofer.

Exceptions here are the Concept E2, the Concept E Magnum Digital, the Motiv 5 Digital, the Concept F, the LT2+R and the Concept S+R.

Naturally you can also equip the fully active systems with an AV Receiver at a later point. The connection is then equal to the partially active sets.
When can I use the rear speakers as direct speakers?
If you aren't able to position the speakers close to the wall as described above, you should use the them as direct speakers. For this purpose the rear switch should be tipped outwards. For use as direct speakers, the rear boxes should be set up to the left and right of the listening position - ideally at the same height, e.g. on a shelf or preferably on a base. If the speakers have to be set up so that they are much higher or lower, it may be advisable to align them to the listening point. For wall mounting it is best to use wall brackets that allow for vertical movement. When using the speakers in direct speaker mode, we recommend that the distance between the two rear speakers exceeds the listening position by 1m. But if you (have to) sit closer, please make sure that the front of the speaker is not pointing directly at you; instead, angle the speakers more into the room.
Can I set up the set in a different way to that described?
The recommended set-up information below represents the best possible arrangement for perfect multichannel playback in your home. Your available space, your partner or your furniture may not always allow you to arrange the speakers in the ideal manner. Try to meet as many of the requirements as possible.

Modern AV Receivers offer numerous options for compensating electronically for any compromises in the set up. Generally speaking, the following rule always applies: you can always use our recommendations as a basis for experimenting with what works best for you, acoustically and optically. Let your ears (and eyes) decide!
My subwoofer is humming. What can I do?
This hum can be caused by the connected devices or disruptions in your electricity current. Please do a test to see which it is.

1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.

A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.

Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.

B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.

  • Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable

  • If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)

  • If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
How do I set up the T 800 SW subwoofer?
At a recommended cut-off frequency of 100 Hz, the best location for the subwoofer is in a straight line between the two front speakers. Alternatively, the bass cube can be placed anywhere in the room. However, you should make sure that the side of the T 800 SW with the round speaker outputs is at least 20 centimetres away from the wall.
Cookies are used on our website
In order to provide the best possible service and to offer relevant advertisements, we use functional, analytical and advertising cookies, as well as similar technologies provided by Teufel Audio or third parties, on our site. For more information, please see our Privacy Policy and Cookie Guidelines, where you can manage your cookie settings and opt-out. By clicking the X symbol, or by continuing to use this website (for example, by clicking a link on the site), you consent to the use of these cookies.