8 week right of return
Up to 12 year guarantee
Free & easy returns
Directly from manufacturer
My account
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"
  • Consono 35 Digital LE "5.1-Set"

Consono 35 Digital LE "5.1-Set"

Ready to roll: Complete gaming, TV & music system
5.1 complete system for fantastic home cinema/multimedia/game sound
Consono 35 Complete
Order the new generation now.
To the new generation
  • 8 week trial
  • Up to 12 year guarantee
  • Free & easy returns


Key advantages at a glance
  • 5.1 complete system for fantastic home cinema/multimedia/game sound
  • Ready to play: Connect your devices, kick back, and enjoy!
  • The DecoderStation 5 Mk2 can integrate up to 8 sources
  • 5.1 subwoofer with 300 watt amplifier and 250 mm bass driver
  • Five identical 2-way satellite speakers feature two midrange drivers each
  • Recommended for rooms up to 30 m²
What others are saying about us
(4.7 of 5 from 60 Reviews)
All ratings

Overview of our technologies

PC Gaming
dts Digital Entertainment
Dolby Pro Logic II
Satelliten-Lautsprecher CS 35 FCR

For an affordable 5.1 surround sound system, Consono 35 packs an incredible amount of intensity. Ample volume, realistic sound effects, gripping cinematic atmosphere and dynamic musical rendering set this system apart from others in its price class. Consono 35 is perfect for anyone wanting fun and functionality at a low price.

Two-way satellites with dual mid-range drivers
Consono 35 delivers harmonious overall sound thanks to identical loudspeaker configuration in 4 satellites and 1 horizontal center.

Each speaker puts two mid-range drivers into play at the same time. Whether watching a movie or listening to music, expect to be stunned by the level of detail Consono 35 brings out of a soundtrack. Optimized speech intelligibility and a loud volume contribute to the effect.

Easy setup
As is the case with the Consono 15 and 25, this larger set requires little setup beyond connecting it to any conventional AV receiver or sound system. Its satellites can easily be wall-mounted. Its center speaker is shipped with a table stand.

Maximum price-to-performance value
Consono 35 is a shining example of Teufel's extraordinary price-to-performance value. It features a lean design which concentrates only on the acoustic essentials – in short it delivers excellent sound available for less money. Expect to experience plenty of great cinema and music with it.

DecoderStation 5 Mk2

Compact rig out
This ultra-compact device works as a controller for each active 5.1 speaker set from Teufel. A subwoofer with an integrated 6-channel amplifier is with 5 speaker output make the Decoder Station 5 Mk 2 a complete multimedia sound system for any type of home entertainment - without AV receiver or amplifier.

Connect it all
The system can support up to eight external devices with a 5.1-speaker set, all you have to do is select between devices without the hassle of swapping cables. Four digital and four analog inputs are available for different applications: computer, laptop, DVD player, games console, TV, DVB-T/S/C, MP3 players, iPod dock, tablets, and media streamers - everything goes.

Surround sound all in one
The Decoder Station 5 Mk2 supports Dolby / DTS for amazing surround sound. The station also enhances conventional stereo signals to give you a surround sound experience that includes all five speakers plus a subwoofer.

Lip sync extrordinaire
The new Lip Sync button adjusts any delay during conversion, so that sound and image are always in sync.

Flexible as you want it
The decoder station can be combined with a variety of 5.1 speaker sets across different formats and offers adjustable crossover frequencies in the range 80 - 250 Hz to give you the best possible sound.

Keep control
A 32-character display keeps you informed about the status of each function. A multi-functional remote control is also included.

What more do you need?
The Decoder Station 5 Mk2 lets you kit out your home entertainment system with a fully active 5.1 speaker set without needing an extra AV receiver. All in all, this baby gives you a compact surround sound system with really vicious sound.

Included components

  • Satellite Speaker CS 35 FCR
  • Centre Speaker CS 35 C
  • Active-Subwoofer US 2110/6 SW
  • power cable
  • Power supply for Decoderstation 5 Mk2
  • Remote Control Decoderstation 5 RC Mk2
  • DecoderStation 5 Mk2 Steuergerät
  • 10 m Speaker Cable AC 0010 CS
  • 20 m Speaker Cable AC 0020 CS
  • Stereo RCA Cable 3.0m - C7530A


Active-Subwoofer US 2110/6 SW
Active-Subwoofer US 2110/6 SW
The active Subwoofer US 2110/6 SW with integrated 5.1-amp and 32 liter enclosure, weighing more than 20 kg, is a real Hercules. The US 2110/6 SW provides a rich, powerful and accurate bass response with a cutoff frequency of 40 Hz (-3 dB). This is due to the built-in amplifier with 125 watts of power, the king-sized woofer 250 mm and the years of experience that Teufel has in building subwoofers.
The Subwoofer U.S. 2110/6 SW ensures a beautiful combination of design and function. The rounded edges, the noble gloss top - the compact subwoofer fits into any living room. The bass reflex port at the bottom and the special notch on the back ensure seamless positioning against most walls. Stable positioning and decoupling from the floor is ensured by four resonators.
The U.S. 2110/6 SW is only sold as part of a Teufel set and cannot be ordered separately.
Active-Subwoofer US 2110/6 SW
Acoustic principle 1-Way-System
Enclosure type Bass reflex
Continuous power handling (IEC - Long Term) 120 Watt
Peak power capacity (IEC - Short Term) 280 Watt
Sensitivity (2.83 V / 1 m) 88 dB
Maximum sound pressure level 113 dB/1m
Impedance 4 Ohm
Frequency range from/to 40 - 200 Hz
Woofer (number per enclosure) 1
Woofer (diameter) 250.00 mm
Woofer (material) Cellulose, coated
Miscellaneous Klippel® measured woofer with long stroke action
Enclosure material MDF
Enclosure surface High gloss (front), matte foil (corpus)
Equalisation openings 1
Equalisation openings (pos.) Bottom
Net internal volume 45 Litres
Integrated stand Yes
Diameter of the stand screw threads 6.00 mm
Magnetic shielding Yes
Miscellaneous Bass reflex channel with DPU technology prevents flow noise
Stabile MDF house construction with glossy accents
Terminal clamps Push terminals
Maximum cable diameter 4.00 mm
Cinch input 5.1 1
High level speaker outputs 5
Lowest frequency (-3 dB) 40 Hz
Bass boost/EQ Yes
Input gain adjustment Yes
Level control Yes
Amplifier technology Class-AB + Class-D
Amplifier configuration 5.1
Amplifier channels 6
Power output capacity impulse (peak) Satellite 30 W
Power output capacity impulse (peak) Bass 150 W
Power output capacity sinus (RMS) Satellite 25 W
Power output capacity sinus (RMS) Bass 125 W
Miscellaneous Potent power supply
Power supply voltage 230 VAC / 50 Hz volts
Standby-Function Yes
Standby-Function Yes
Standby-Power consumption 0.50 watt
Maximum power consumption 550 watt
Mains cable - IEC connector (non-heating device) Yes
Safety class 2
Fuse Yes
Storage for settings when disconnected Yes
Automatic on/off Yes
Miscellaneous Complies with CE, RoHS and REACH requirements
Depth 34.50 cm
Width 34.50 cm
Height 55.00 cm
Weight 20.60 kg
Miscellaneous Resonance damping rubber stand feet included
Centre Speaker CS 35 C
Centre Speaker CS 35 C
The CS 35 C center speaker is the acoustic equivalent of the CS 35 FR satellite speaker, but is set up for horizontal placement. In addition to its 19 mm high-range dome driver, it incorporates two 80 mm diameter mid-range drivers.

This ensures that human voices are particularly intelligible and faithful to detail, even when the listener isn't sitting in the optimal position (i.e. exactly in the middle). The speaker also radiates sound better thanks to a convex front plate.

The loudspeaker is delivered with a cradle, but can also be mounted on the wall. The CS 35 C is not offered individually, but only as part of a Consono 35 set.
Centre Speaker CS 35 C
Continuous power handling (IEC - Long Term) 60 Watt
Peak power capacity (IEC - Short Term) 120 Watt
Sensitivity (2.83 V / 1 m) 88 dB
Impedance 4-8 Ohm
Frequency range from/to 150 - 20000 Hz
Crossover frequency internal switch 3400 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 19.00 mm
Midrange driver (number per enclosure) 2
Midrange driver (diameter) 80.00 mm
Midrange driver (material) Cellulose
Acoustic principle 2-way
Enclosure type Closed
Enclosure material Molded ABS
Enclosure surface Glossy
Net internal volume 1.30 Litres
Wall mounting brackets Yes
Magnetic shielding Yes
Maximum cable diameter 1.50 mm
Depth 9.80 cm
Width 20.00 cm
Height 9.00 cm
Weight 0.82 kg
Satellite Speaker CS 35 FCR
Satellite Speaker CS 35 FCR
These subtly designed and easily integrated speakers house a 19 mm, high-range dome driver along with doubled power in the mid-ranges (2 x 80mm). This increased amount of membrane surface guarantees potential for higher dynamics and a "rounder" sound. Their loud volume can be attributed to a high degree of efficiency of 88 dB/w/m.

The speakers radiate sound better than conventionally-constructed ones would thanks to a curved front plate. Set the CS 35 FCR upright or on its side. It can be mounted to a wall or directed at the listener's location using the appropriate mount. The CS 35 FCR is only available as part of the Consono 35 set.
Satellite Speaker CS 35 FCR
Continuous power handling (IEC - Long Term) 60 Watt
Peak power capacity (IEC - Short Term) 120 Watt
Sensitivity (2.83 V / 1 m) 88 dB
Impedance 4-8 Ohm
Frequency range from/to 150 - 20000 Hz
Crossover frequency internal switch 3400 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 19.00 mm
Midrange driver (number per enclosure) 2
Midrange driver (diameter) 80.00 mm
Midrange driver (material) Cellulose
Acoustic principle 2-way
Enclosure type Closed
Enclosure material Molded ABS
Enclosure surface Glossy
Net internal volume 1.30 Litres
Wall mounting brackets Yes
Magnetic shielding Yes
Maximum cable diameter 2.50 mm
Suitable for AV receiver Yes
Depth 9.80 cm
Width 9.00 cm
Height 20.00 cm
Weight 1.16 kg
Decoderstation 5 Mk2
Decoderstation 5 Mk2
This ultra compact control device serves as a preamp for a 5.1-powered subwoofer. The Decoder Station Mk2 offers four digital (optical and 2x 2 x coaxial) inputs plus four stereo analog inputs (1 x 5.1, 1 x stereo). These are located on the back of the device and are suitable for the connection of many different devices. The integrated decoder for DTS, Dolby Digital, Dolby Pro Logic ensures perfect surround sound for many playback devices.

With the extra Lip Sync option you ensure that video and audio are played simultaneously. The Decoder Station is compatible with many different types of speakers in the frequency range of 80-250 Hz. The included remote control gives you access to all the devices that you have connected the decoder Station Mk2.
Decoderstation 5 Mk2
Digital inputs coaxial 2
Digital inputs optical 2
Cinch input stereo 3
Cinch input 5.1 1
Cinch output 5.1 1
Dolby Digital Yes
Miscellaneous multichannel audio
Dolby Pro Logic Yes
Dolby Pro Logic II Yes
Power supply voltage 100 - 230 volts
Standby-Function Yes
Standby-Power consumption 0.50 watt
Storage for settings when disconnected Yes
Automatic on/off Yes
Integrated DSP Yes
Remote control Infrared
Depth 15.00 cm
Width 23.50 cm
Height 5.40 cm
Weight 1.01 kg

Expert reviews

How our customers rated this product:

Downloads & support

Help regarding this product
Can I operate the 5.1 set using a 6.1 or 7.1 receiver?
Yes. All Consono systems are suitable for connection to any conventional AV receiver – regardless of whether they are configured for 5.1, 6.1 or 7.1 systems. When connecting a Consono set to a 6.1/7.1 receiver, leave the rear-center terminal(s) unconnected.
Can I use my Consono system to listen to music?
Of course! All of the Consono variants play music from CDs just as well as they play home cinema sound from DVDs. The Consono systems are a top-quality replacement for old stereo speakers.
How do I best set up the Consono's subwoofer?
The Consono subwoofer can be placed anywhere without influencing the set's other loudspeaker. Ideally it is placed on the direct line between the two front satellites. A distance ratio of 1/3 to 2/3 generally brings about good results.
How do I best set up the Consono front satellite speakers?
The front loudspeakers of the Consono sets are best set up based on the traditional stereo model (distance to listener = distance between left and right speaker).

Optional speaker stands or wall mounts are perfect for this task. Using Teufel speaker stands automatically ensures the satellites will be positioned at their optimal height. Wall mounts make it possible to position the speakers vertically or horizontally. When placing the speakers on walls or shelves, the rule of thumb is that a height between 80 centimetres and 1,60 metres should be chosen. If the speakers need to be placed outside of this range, they can also be angled up or down towards the listening position. What's important is that the center and front loudspeakers should be positioned in a straight line or arranged around the television to form a slightly concave line.
Do I absolutely need an AV reciever to use Consono 15, 25 and 35?
Can I order the Teufel speakers in different colours than those offered?
To realise the very reasonable sales prices usual for Teufel, it is not possible to offer the speakers in a multitude of housing designs.

This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.

A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
Which cables do I need to connect a Teufel speaker set to the AV Receiver?
A home cinema system needs speaker cables to connect the satellite speakers to the receivers, and an NF mono RCA cable to connect the active subwoofer to the sub out socket of the AV Receiver.
When can I use the rear speakers as direct speakers?
If you aren't able to position the speakers close to the wall as described above, you should use the them as direct speakers. For this purpose the rear switch should be tipped outwards. For use as direct speakers, the rear boxes should be set up to the left and right of the listening position - ideally at the same height, e.g. on a shelf or preferably on a base. If the speakers have to be set up so that they are much higher or lower, it may be advisable to align them to the listening point. For wall mounting it is best to use wall brackets that allow for vertical movement. When using the speakers in direct speaker mode, we recommend that the distance between the two rear speakers exceeds the listening position by 1m. But if you (have to) sit closer, please make sure that the front of the speaker is not pointing directly at you; instead, angle the speakers more into the room.
My subwoofer is humming. What can I do?
This hum can be caused by the connected devices or disruptions in your electricity current. Please do a test to see which it is.

1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.

A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.

Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.

B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.

  • Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable

  • If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)

  • If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
How do I connect my fully active Teufel system to a multi-channel sound card?
If your sound card is set up for 5.1 operation, you will usually find three 3.5 mm mini jack outputs. Connect the card using three Y adapter cables in the 3.5 mm mini jacks to 2 x cinch formats to the inputs for the front R/L, rear R/L, centre and subwoofer at the rear of the fully active Teufel set.

The colours of the outputs and the types of signals transferred at each output differ from sound card to sound card. Please refer to the sound card manual. The Teufel system then reproduces the surround signal decoded by the sound card.

The five satellites are connected directly to the speaker clamps on the subwoofer, using the speaker cable supplied. Strip and split the ends of the speaker cable to do so. Speakers and amplifiers have corresponding [+] and [−] clamps. The [+] cable of the speaker cable is marked with a stripe. It is important to observe the correct polarity when connecting the speakers: the plus pole of the speaker connects to the plus pole of the amplifier and the minus pole of the speaker to the minus pole of the amplifier.
The subwoofer switches itself off after a long period at high volume (the satellites keep playing).
It is possible that you have operated the system outside of its performance boundaries.

The system is an extremely good-value, fully active system that performs very well for its class. It has been designed for home cinema use in smaller rooms and for PC use. It should be taken into consideration, especially in fully active operation with sound cards and DVD players, that a PC speaker system cannot fill an entire room with sound, only the area where the user is sitting. This system has not been designed for and is not suitable for long-term use at very high volumes.

If the system is operated when the volume is too high, the safety cut-off in the power pack may be activated. This cut-off switch is required for safety reasons and prevents the power pack, the power amplifiers and the speakers from sustaining damage. If this cut-off switch is activated, it means that the system has reached its performance boundaries.

Our problem-solving tips:

• Position the system speakers closer to where you are sitting. Then much less power will be needed for loud sound reproduction.

• Use an AV Receiver that will supply the satellites with power. This takes the pressure off the power pack and the power amplifiers of the system.

However, a fault cannot be ruled out if the system switches off at low volumes in rooms of 20 m² or smaller.

We are unable to authorise additional active cooling of the power amplifier. It no longer corresponds to the specifications for the operation of our products. Failures caused by additional active cooling can clearly be attributed to negligent action by the user. As operation with active cooling has a direct effect on the function of the product, it voids all warranty claims.
One satellite speaker generates no sound or distorted sound, but the other one works fine. Why?
In order to more precisely identify the problem, please try swapping the channel positions of the two satellite speakers. It should be possible to find out if the problem is a defective satellite speaker, or if it has to do with the electronics of the amplifier. If the satellite speaker functions after the swap, then the electronics of the amplifier may be defective. If not, the satellite speaker is likely broken.
There is no sound coming from either the speakers or the subwoofer
Please check that the operating lights of your Teufel device are on. If not, please change the fuse: it could be that the mains fuse on the subwoofer may have blown due to overvoltage in the mains. The fuse box is located underneath the plug. Use a small screwdriver to lever it out, replace the two jammed fuses and insert the fuse holder back into the fuse box. Now the subwoofer should be ready for use again.
Basic function test.
You can check the function of the subwoofer and the satellites by only connecting the (stereo) signal from an external source that is guaranteed to be good quality, such as a music CD played on a (portable) CD player, using a RCA cable (and possibly a Y adapter) with the front input L/R on the subwoofer.

The other four inputs on the subwoofer do not need to be occupied (= RCA cable disconnected). With this connection plug arrangement of front In L/R, the Concept E Magnum Power Edition amplifier activates all satellites and the subwoofer through internal distribution. If the subwoofer and all five satellites now play correctly via a directly connected CD player, the Concept E Magnum Power Edition was not receiving the correct signal before. Either the cinch cable is defective (try exchanging it) or the output of your source appliance is not producing the correct signal.

If you continue to experience unwanted noise/individual malfunctions, there is possibly a defect in the Teufel system.
How do I connect the five satellites to the Motiv 5?
The five satellites are connected directly to the speaker clamps on the subwoofer, using a normal speaker cable. We recommend using the speaker cable from the MO 500 W accessories package. Separate the ends of the speaker cable and remove the insulation.

Speakers and amplifiers have corresponding [+] and [−] clamps. The [+] cable of the speaker cable is marked with a stripe. It is important that the polarity of the speakers is identical when they are connected: the positive pole of the speaker connects to the positive pole of the amplifier and the negative pole of the speaker to the negative pole of the amplifier. Connecting the cables with the incorrect phases can result in thin sound, weak bass and reduced stereo characteristics. For multichannel surround systems, it is also important that all speakers are connected with the correct polarity in order to ensure the right three-dimensional atmosphere and the correct alignment of the sound.
How do I connect my fully active Teufel system to a notebook?
You can use our fully active sets to create perfect PC sound, not only on a desktop computer but also with a notebook.

If your notebook only has a single 3.5 mm stereo jack output, connect it using a 3.5 mm mini jack cinch Y adapter cable to the front input "In R/L" on the subwoofer.
Thanks to the integrated "Upmix" switch in the Concept E 2/ E Magnum / Motiv 5 / Concept F, the 4 satellite speakers play back a stereo signal and the centre speaker and the subwoofer each play back a mono signal. This admittedly does not sound as perfect as Dolby Digital, but does sound better than pure stereo playback.

You will still have the chance later on to operate your speaker using a convertible external 5.1-capable sound card, in order to experience the full pleasure of Dolby Digital and DTS.

Different companies, such as Creative, Terratec, Toshiba, ESI/Audiotrak and M-Audio, offer solutions for connection to the PCMCIA port or via USB or FireWire.
Where is the optimal place for the centre of my Lautsprecher Teufel Surround System in a 5.1/6.1/7.1 configuration?
Because the centre plays back spoken dialogue, this speaker must be positioned as centrally as possible under or over the TV/monitor or the screen.

If the centre is placed outside the area of 40 centimetres to 1.20 meter height, it should be slightly inclined or angled towards the listener.

My subwoofer that's connected to the Decoderstation 5 has no bass signal. What should I do?
Turn on the Decoderstation 5. Go tot he main menu by pressing the dial knob once that's located at the front of the device. Choose "Speaker size" off the menu. Set the speaker size to "SSS+Sub". For more information, see page 18 in the user manual.
Connecting your digital computer - how do we do that?
Connect the digital output of your sound card using an optical or coaxial cable (depending on the digital format of your card) tot he respective optical or coaxial input on your Decoderstation 5.

Some notebooks and sound cards have routed your digital output to the customary mini-cinch output. Software installed on your PC has been configured to switch the signal. If this is the case, you will need a special cable.

The digital connection guarantees interference-free 5.1 surround-sound playback. These instructions apply to notebooks as well as desktop computers.
Connecting Sat receiver/Premiere decoder/DVB-T receiver - how do I do that?
Let the receiver produce crystal-clear digital sound using its digital outputs. Digital Out to Digital In. Done!

If your TV receiver does not have a digital output, you can still connect both analogue outputs (Audio Out L/R) with one of the three analogue stereo input pairs on the Decoderstation 5.

Thanks to the Teufel decoder's Dolby ProLogic matrix, you can still enjoy real impressive surround-sound. Better than stereo, and far better than mono!
Meine Decoderstation 5 reagiert nicht bzw. arbeitet ungenau. Was kann ich tun?
1. Schalten Sie die Decoderstation 5 in den standby-Modus.
2. Schalten Sie die Decoderstation 5 ein und drücken sowie halten Sie sofort die Return-Taste.
3. Die Meldung "restore factory settings" erscheint im Display.
4. Bestätigen Sie die Meldung mit einem Druck auf den Drehregler.
Warum muss ich für den Dolby ProLogic II Movie-Modus die Entfernung für die Surround-Kanäle separat einstellen?
Dolby fordert in diesem Modus eine Mindestverzögerungszeit von 10 Millisekunden für die Surround-Kanäle - das entspricht umgerechnet einem Mindestabstand von -3,3 Meter. Als Folge können nur Werte oberhalb dieser Schwelle eingegeben werden. Daher wird das Surround-Delay für diesen Modus separat gespeichert um bei allen anderen Decodier-Modi den korrekten Abstand (ohne Mindestverzögerungszeit) einstellen zu können.
Are all delay settings the same for all Dolby Digital/dts playback modes?
The configuration settings for an optimal playback quality apply to all following modes except for Dolby ProLogic II Movie (see pages 14-18 of the handbook).

Why do the distances for the surround-sound channels have to be separately set for the Dolby ProLogic II Movie mode?

For this mode, Dolby requires a minimum delay time of 10 milliseconds for the surround-sound channels. This is equivalent to a minimum distance of 3.3 metres. Consequently, only values higher than this threshold can be set. For this reason, the surround-sound delay configurations for this mode are made separately, so that the correct distance (without minimum delay time) can be set for the other decoding modes.
Connecting your gaming console - how do I do that?
Now you can generate an authentic 5.1 sound from your Xbox or PlayStation, as long as your model has digital outputs. Use a digital cable to connect the console's digital out to the Decoderstation 5's in, using the appropriate optical or coaxial cable.

From now on, you will even be able to hear the enemy fighter approaching you from behind!
Do surround signals have to be decoded before they reach the decoderstation 3?
No. As already indicated in the product description, the decoderstation has integrated decoders for common surround sound systems, e.g. Dolby Digital / dts and can supply a fully active home cinema audio system with surround signals without any additional components.
Cookies are used on our website
In order to provide the best possible service and to offer relevant advertisements, we use functional, analytical and advertising cookies, as well as similar technologies provided by Teufel Audio or third parties, on our site. For more information, please see our Privacy Policy and Cookie Guidelines, where you can manage your cookie settings and opt-out. By clicking the X symbol, or by continuing to use this website (for example, by clicking a link on the site), you consent to the use of these cookies.