8 week right of return
Up to 12 year guarantee
Free & easy returns
Directly from manufacturer
B2B
My account
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"
  • Theater 200 Mk3 "5.1-Set Cinema"

Theater 200 Mk3 "5.1-Set Cinema"

Huge sound for every day: film, stereo and multichannel
Home cinema speaker system in uncompromising sound quality for film and music
Theater 500 Surround "5.1-Set"
Order the new generation now.
To the new generation
  • 8 week trial
  • Up to 12 year guarantee
  • Free & easy returns

Highlights

Key advantages at a glance
  • Home cinema speaker system in uncompromising sound quality for film and music
  • 2 HiFi speakers plus a center iin AGD technology - details AND dynamics!
  • 2 directional dipoles for rear sound area for real cinema atmosphere
  • 250 watt subwoofer with a 330 mm woofer guarantees real bass!
  • Works with every AV Receiver
  • Recommended for rooms up to 50 sqm

The Theater 200 Mk3 is the latest version of the Theater 2, released in 1995 as the first pure surround sound system from Teufel. Here are the roots of Teufel's reputation as a home cinema specialist - we were the first in Germany to offer this! This system - refined and improved - represents the highest level of performance and quality without compromise.

Great sound for home cinema and music
The all new front speakers make the highs sing like never before thanks to a ventilated dome in the optimised waveguide tweeter. A 170 mm klippel-optimised fiberglass/cellulose driver gets the Hz going (from 3200!) in the mids and upper basses.

Teufel Adjusted Group Delay
The striking curved edge in the housing is not only visually attractive, but makes sense acoustically, too. The corrected runtime phases is offset by the set-back tweeter and it ensures clear music details.

Identical front end
The center is set up in the precise same way as the front speakers, thus adding to the simultaneous playback.

To the rear!
The T 130 D with tweeter and woofer included are responsible for a crackling great sound from the rear sound area. It's a mark of our success and our commitment to sound that we offer dipoles in this price range.

250 Watts of bass

The subwoofer with its especially large woofers in their reflex housing ensure the T 2300 sound down to 28 Hz. The result? An earthy, deep and incredibly stimulating bass performance with enormouse capabilites of to 107 dB! More than enough power for rooms up to 50 sqm.

This is your Best Buy
Pure dynamics, solid materials, fantastic sound - you can't find better. Buy yours today!

Included components

  • Dipole Speaker T 130 D (right)
  • Dipole Speaker T 130 D (left)
  • Centre Speaker T 230 C
  • Shelf Speaker T 300 Mk2 (pc.)
  • Subwoofer T 2300 SW

Specifications

Subwoofer T 2300 SW
Subwoofer T 2300 SW
With its Klippel-optimised 330 mm woofer, a total housing weight of 25 kilos with 65 liter volume and a 250 watt Class D amplifier, the T 2300 SW delivers enormously powerful, rich bass down to 28 Hz. This imposing Teufel subwoofer can fill rooms of up to 50 sqm with earth-shattering bass - power down to 107 dB!
Subwoofer T 2300 SW
Speaker
Acoustic principle 1-Way-System
Enclosure type Bass reflex
Maximum sound pressure level 107 dB/1m
Woofer (number per enclosure) 1
Woofer (diameter) 330.00 mm
Woofer (material) Cellulose, coated
Enclosure material MDF
Enclosure surface Lacquer matte + foil
Equalisation openings 2
Equalisation openings (pos.) Bottom
Removable front cover Yes
Net internal volume 68 Litres
Integrated stand Yes
Magnetic shielding Yes
Connections
Cinch input stereo 1
Cinch output stereo 1
Electronics
Lowest frequency (-3 dB) 28 Hz
Frequency regulator (range) 40 - 240 Hz
Full Range/Low Pass switch Yes
Level control Yes
Phase control Yes
Amplifier technology class d
Amplifier channels 1
Power output capacity impulse (peak) Bass 260 W
Power output capacity sinus (RMS) Bass 250 W
Standby-Function Yes
Standby-Power consumption 0.50 watt
Mains cable - IEC connector (non-heating device) Yes
Safety class 2
Fuse Yes
Automatic on/off Yes
Dimensions
Depth 48.50 cm
Width 38.00 cm
Height 60.00 cm
Weight 24.30 kg
Shelf Speaker T 300 Mk2 (pc.)
Shelf Speaker T 300 Mk2 (pc.)
The best in HiFi shelf speakers. Optimized second generation, with AGD technology and new tweeters in new Waveguide housing guarantees the best in sound - whether on the wall or on stands. Two-way construction with 170 mm woofers and ventilated 25 mm tweeter. 120 watts of music performance!
Shelf Speaker T 300 Mk2 (pc.)
Speaker
Acoustic principle 2-Way-System
Enclosure type Bass reflex
Continuous power handling (IEC - Long Term) 100 Watt
Peak power capacity (IEC - Short Term) 120 Watt
Sensitivity (2.83 V / 1 m) 87 dB
Minimum amplifier output power recommended 25 Watt
Maximum sound pressure level 104 dB/1m
Impedance 4 - 8 Ohm
Frequency range from/to 65 - 21000 Hz
Crossover frequency internal switch 3200 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 25.00 mm
Tweeter (material) Fabric
Bass/Midrange driver (number per enclosure) 1
Bass/Midrange driver (diameter) 170.00 mm
Bass/Midrange driver (material) Cellulose, coated
Enclosure material MDF
Enclosure surface Foil
Equalisation openings 1
Equalisation openings (pos.) Back
Removable front cover Yes
Net internal volume 13 Litres
Diameter of the stand screw threads 6.00 mm
Terminal clamps Screw terminals, gold plated
Suitable for banana plug Yes
Maximum cable diameter 4.00 mm
Suitable for AV receiver Yes
Dimensions
Depth 27.50 cm
Width 19.50 cm
Height 34.00 cm
Weight 6.40 kg
Dipole Speaker T 130 D (right)
Dipole Speaker T 130 D (right)
Two tweeters and two midrange drivers are integrated into this dipole speaker for both front and back channel operation. These speakers are perfect for the ultimate in sound effects and a realistic room spatiality and sound. These speakers emit not only in one direction, but both. This is a very diffuse type of sound and thanks to the reflections on the walls it's very difficult to locate the sound source.

The rear two-way speaker approach can be switched off if required. This setting is useful when the speaker is placed in the room or on a stand, versus the wall diffusion.

The speaker has magnetically removable front covers. The rings on the front of the bare speaker in a gunmetal finish are especially nice.

Stable gold-plated screw terminals can handle cable with a cross-section area of up to 4 mm².
Dipole Speaker T 130 D (right)
Speaker
Continuous power handling (IEC - Long Term) 90 Watt
Peak power capacity (IEC - Short Term) 140 Watt
Sensitivity (2.83 V / 1 m) 89 dB
Minimum amplifier output power recommended 50 Watt
Impedance 4 - 8 Ohm
Frequency range from/to 100 - 21000 Hz
Crossover frequency internal switch 2400 Hz
Crossover frequency to Woofer (recommended) 80 - 120 Hz
Phase switch Dipole/Monopole Yes
Tweeter (number per enclosure) 2
Tweeter (diameter) 25.00 mm
Tweeter (material) Fabric
Bass/Midrange driver (number per enclosure) 2
Bass/Midrange driver (diameter) 130.00 mm
Bass/Midrange driver (material) Cellulose, coated
Acoustic principle 2-way
Enclosure type Closed
Enclosure material MDF
Enclosure surface Matte + Foil
Removable front cover Yes
Net internal volume 6 Litres
Wall mounting brackets Yes
Keyhole plate mounted Yes
Magnetic shielding Yes
Terminal clamps Screw terminals, gold plated
Suitable for banana plug Yes
Maximum cable diameter 4.00 mm
Suitable for AV receiver Yes
Dimensions
Depth 21.40 cm
Width 16.30 cm
Height 26.00 cm
Weight 5.10 kg
Centre Speaker T 210 C
Centre Speaker T 210 C
A reworked center speaker with a neutral, amazing sound works perfectly with the new T series. Unusual, but useful: the outsourced tweeter of the T 230 C Center speaker. Through a construction trick of the driver arrangement which ensures harmonious, absolutely simultaneous playback. Stable, gold-plated screw terminals handle cable with a cross section of up to 4 mm².

These speakers' identical kit to the front 230 speakers ensure perfect sound. The T 230 is simply phenomenal.
Centre Speaker T 210 C
Speaker
Continuous power handling (IEC - Long Term) 80 Watt
Peak power capacity (IEC - Short Term) 140 Watt
Sensitivity (2.83 V / 1 m) 88 dB
Minimum amplifier output power recommended 50 Watt
Impedance 4 Ohm
Frequency range from/to 65 - 21000 Hz
Crossover frequency internal switch 3000 Hz
Crossover frequency to Woofer (recommended) 80 - 120 Hz
Tweeter (number per enclosure) 1
Tweeter (diameter) 25.00 mm
Tweeter (material) Fabric
Woofer (number per enclosure) 1
Woofer (diameter) 170.00 mm
Woofer (material) Cellulose, coated
Acoustic principle 2-way
Enclosure type Closed
Enclosure material MDF
Enclosure surface Lacquer matte + foil
Removable front cover Yes
Net internal volume 15 Litres
Magnetic shielding Yes
Terminal clamps Screw terminals, gold plated
Suitable for banana plug Yes
Maximum cable diameter 4.00 mm
Suitable for AV receiver Yes
Dimensions
Depth 26.50 cm
Width 44.00 cm
Height 25.00 cm
Weight 6.80 kg

Downloads & support

Help regarding this product
Do I also have a 6.1/7.1 playback for a 5.1 recording?
Usually, all 6.1/7.1 AV Receivers can generate a 6.1/7.1 playback from a 5.1 recording. The procedure is comparable with the Dolby Pro Logic Decoder, which generates a matrix circuit from the stereo signal of a centre channel.

The AV Receivers thus generate a rear centre channel from the rear R/L channels of a 5.1 recording through the matrix circuit. The stronger the rear R/L effects on the DVD, the stronger the signal from the rear centre.
Can I connect the LT 4 directly to a DVD player or PC?
No.

The LT 4 is a partially active system that requires AV receiver operation. It has a built-in amplifier that only supplies bass tones in the subwoofer housing That is why an "AV Receiver", i.e. a combination of radio receiver and multichannel amplifier, is essential for using the LT 4.

The subwoofer is connected from the Line In R input to the AV receiver's sub out jack using a mono RCA cable, while the three front satellites are connected to the three speaker outputs of the AV Receiver using the speaker cable and are supplied with power from there.

Connect signal-emitting source appliances such as DVD player or PC etc. directly to the corresponding input jacks on the AV Receiver.
When would it be worth upgrading my 5.1 system to 6.1/7.1 sound?
Naturally 5.1 channel systems that play back all of the sound tracks contained on the DVDs already offer an excellent home cinema experience.

For the new 6.1 or 7.1 sound formats, a rear centre channel is controlled in addition to these channels. This channel, coded in the stereo effect channels, enables the better positioning of effects and music signals directly behind where you are sitting.

If using two speakers for the rear centre channel, the optimal seating position is not tailored to an individually specified position, i.e. you don't have to be seated in the exact centre.

In the following cases we would recommend upgrading to a 6.1 or 7.1 system:

• Your sitting position is not always dead centre, or you often have several viewers

• You have had a 5.1 system for a very long time and would like an improvement

• Your AV amplifier/receiver is designed as a 6.1 or 7.1 receiver and offers the corresponding connection possibilities

• You can also set up one and/or two rear centres. If you are currently building/renovating your house or flat, we would recommend you lay the cables for the additional rear centre channels in any case.

• Modern BluRay players usually issue a true 7.1 surround sound signal at all digital outputs and are thus optimally suitable - presuming the relevant AV Receiver - as a signal transmitter for a 7.1 channel home cinema system.
How do I upgrade my system to a 6.1 or 7.1 sound format?
The choice of speaker(s) depends on the AV Receiver/amplifier. This has an additional power amplifier for one rear centre (6.1) or its two (7.1). You can easily see this by the wattage (e.g. 6 x 100 watt or 7 x 100 watt). To the existing (side) rear speakers for right/left (5.1 technology), one or two additional rear centres are utilised in addition (6.1 or 7.1 technology).

• My AV amplifier/receiver has six connections/power amplifiers (6.1):

In this case we recommend connecting the same centre at the rear that you also used in the front area.

• My AV amplifier/receiver has 7 connections/power amplifiers (7.1):

If you already use dipoles or direct emitters for your 5.1 system, then you have a choice of either supplementing two more dipoles or two direct emitters. For wall assembly and a short distance from the seating location to the rear wall (less than 1.00 metres), we would recommend dipoles. As soon as you want to set up the speakers on bases or on a shelf, then direct emitters would be the better choice.

Information:
Even if the AV Receiver/amplifier only has the connection and power amplifier performance for one rear centre, it is still possible to connect two instead of just one speaker through series connection.

Exception:
• The AV amplifier/receiver has seven connections/power amplifiers, but I can only set up one rear centre. As the 7.1 AV amplifiers/receiver also offer the option of operating just one of the two outputs (usually can be set in the speaker set-up!), you can also only connect just one rear centre.

Here we recommend connecting the same centre to the rear that you also used in the front area. For short distances to the listening location (less than 1.00 metres), a dipole would be the better choice - especially if you are also using dipoles at the sides.
Is it a problem if the speakers are at different distances to where you are sitting?
Since the distance and volume of every individual speaker can be adjusted for the digital home cinema receivers, asymmetrical set-ups can be easily compensated. 
How do I equalise my home cinema system with the help of a sound level meter?
Take the level meter with you to the listening position and point the measuring device directly towards the front centre speaker. Now start the sound generator of the receiver (or of the sound card or DVD player) and equalise all speakers in succession to the same level.

The position and alignment of the measuring device should not be changed during this procedure. For a Teufel sound level meter, proceed as detailed in the following:

1. Remove the protective tab from the battery.

2. Set the weighting to "A" - only the "A" position considers the full frequency range during measuring!

3. Set the response to Slow.

4. Set the Range to 70.

5. Start the test noise from your AV device.

6. Change the volume for every individual channel at the AV device so that the level meter shows 75 dB (meaning between +4 and +6).

7. Done!
What is the difference between the 5.1 and 7.1 configuration?
Compared with the 5.1 set, the 7.1 set has two extra speakers for the back rear centre channel.

The 5.1 channel set plays back all sound tracks on DVDs/Blu-rays and creates an excellent home cinema experience.

With the 7.1 sound format, a rear centre channel is also generated in addition to these channels and distributed to two further speakers (the "rear centre"). This channel, which is encoded in the stereo effects channels, allows better location of effects and music signals directly behind the sitting position.

If you use two speakers for the rear centre channel (i.e. installed 7.1 set), the optimum sitting position is not restricted to one specific place, so you don't have to be sitting exactly in the middle and several listeners can enjoy the best sound.
Where is the optimal place for the centre of my Lautsprecher Teufel Surround System in a 5.1/6.1/7.1 configuration?
Because the centre plays back spoken dialogue, this speaker must be positioned as centrally as possible under or over the TV/monitor or the screen.

If the centre is placed outside the area of 40 centimetres to 1.20 meter height, it should be slightly inclined or angled towards the listener.


Which speaker cables does Teufel recommend?
For smaller sets up to Theater 1, we recommend using the 2.5 mm² Teufel speaker cable for optimal sound quality if the required length does not exceed 15 metres.

For Theater 2 and larger systems, we recommend the Teufel cable with 4 mm² cross-section for the front/centre speakers, and the 2.5 mm² cable up to a length of 15 metres for the effect speakers.

Choose a higher cross-section for even greater lengths.
Can I order the Teufel speakers in different colours than those offered?
To realise the very reasonable sales prices usual for Teufel, it is not possible to offer the speakers in a multitude of housing designs.

This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.

A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
Which cables do I need to connect a Teufel speaker set to the AV Receiver?
A home cinema system needs speaker cables to connect the satellite speakers to the receivers, and an NF mono RCA cable to connect the active subwoofer to the sub out socket of the AV Receiver.
Is it possible to combine speaker cables with different cross-sections?
To supplement missing cable lengths you can use speaker cables of differing thicknesses without acoustical differences - provided there are no extreme differences in the cross-sections.
Should I rather choose a fully active or a partially active speaker set?
It is compulsory to connect partially active systems to an AV Receiver. This supplies the five to seven satellite speakers with the necessary power. Only the subwoofer works additionally with its own amplifier. The investment in a new system is higher because of the AV Receiver, but the solution is also much more flexible. After all, you can connect several signal sources, such as a TV, satellite receiver, PC, game console and MP3 player to an AV Receiver at the same time.

Fully active set do not necessarily need an AV Receiver. The five to seven satellite speakers here are supplied with power by the amplifiers which are installed in the subwoofer in addition to the subwoofer power amplifier. This saves you the costs of a receiver, but it is usually only possible to connect one source to our fully active subwoofer.

Exceptions here are the Concept E2, the Concept E Magnum Digital, the Motiv 5 Digital, the Concept F, the LT2+R and the Concept S+R.

Naturally you can also equip the fully active systems with an AV Receiver at a later point. The connection is then equal to the partially active sets.
Can I set up the set in a different way to that described?
The recommended set-up information below represents the best possible arrangement for perfect multichannel playback in your home. Your available space, your partner or your furniture may not always allow you to arrange the speakers in the ideal manner. Try to meet as many of the requirements as possible.

Modern AV Receivers offer numerous options for compensating electronically for any compromises in the set up. Generally speaking, the following rule always applies: you can always use our recommendations as a basis for experimenting with what works best for you, acoustically and optically. Let your ears (and eyes) decide!
My subwoofer is humming. What can I do?
This hum can be caused by the connected devices or disruptions in your electricity current. Please do a test to see which it is.

1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.

A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.

Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.

B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.

  • Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable

  • If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)

  • If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
Cookies are used on our website
In order to provide the best possible service and to offer relevant advertisements, we use functional, analytical and advertising cookies, as well as similar technologies provided by Teufel Audio or third parties, on our site. For more information, please see our Privacy Policy and Cookie Guidelines, where you can manage your cookie settings and opt-out. By clicking the X symbol, or by continuing to use this website (for example, by clicking a link on the site), you consent to the use of these cookies.