Overview of our technologies
Concept C 300 Wireless is the flagship of Teufel's Concept C line. It delivers unprecedented sound and comfort.
This 2.1 speaker set features a specially-designed USB sound card – a USB stick sends music wirelessly from any computer to the loudspeakers. Play an MP3 while relaxing on the couch and your Concept C 300 Wireless across the room delivers genuine Teufel sound!
300 watts of power
Concept C 300 Wireless is powered by an extremely capable integrated amplifier. The set's 250 mm bass driver is powered by 140 watts of RMS output, and its two stereo satellite speakers are powered by 30 watts of RMS output each. Expect crisp, clean sound to fill rooms up to 25 sqm.
A handy remote control gives you an easy way to control the set's volume and bass mix and switch between input sources. In addition to its wireless input source, Concept C 300 can also be connected via cable to devices including an MP3 player, an iPod dock or a gaming console.
Sound and comfort
Concept C 300 Wireless is a completely modern loudspeaker system. Free yourself from cables and enjoy your music more comfortably. It's a genuine Teufel set, so you can be sure it's built to time-tested standards. Expect quality sound without any compromises...
- Satellite Speaker CE 20 FCR
- Table Stand CE 20 TP
- CC 300 SW Subwoofer
- Remote control for CC 300 / 302 SW+USB/WL
Thanks to an uncommonly large 250 mm bass driver with bass reflex tuning in a 40 litre wood enclosure, the set guarantees intense and powerful bass down to 36 Hz (-3 dB).
The three integrated amplifiers deliver 140 watts RMS output to the bass driver alone, as well as 30 watts RMS output to each of the two satellite speakers. An antenna on the back of the subwoofer wirelessly receives audio signals via an included USB stick and transfers them to the internal amplifier.
Alternatively a stereo cinch input is included. The subwoofer is controlled via an included remote control.
The CC 300 SW is only available as part of a Concept C 300 Wireless set.
|Woofer (number per enclosure)||1|
|Woofer (diameter)||250.00 mm|
|Woofer (material)||Cellulose, coated|
|Enclosure type||Bass reflex|
|Enclosure surface||High gloss (front), foil (corpus)|
|Equalisation openings (pos.)||Front|
|Net internal volume||40 Litres|
|Terminal clamps||Screw terminals, gold plated|
|Cinch input stereo||1|
|Lowest frequency (-3 dB)||36 Hz|
|Bass boost/EQ||Bass control|
|Miscellaneous||Wireless Audio USB-Stick|
|Amplifier technology||Class AB, IC type|
|Power output capacity impulse (peak) Satellite||50 W|
|Power output capacity impulse (peak) Bass||200 W|
|Power output capacity sinus (RMS) Satellite||30 W|
|Power output capacity sinus (RMS) Bass||140 W|
|Performance measured by (Ohm)||4|
|Power supply voltage||220 - 240 volts|
|Standby-Power consumption||1 watt|
|Maximum power consumption||400 watt|
|Mains cable - IEC connector (non-heating device)||Yes|
Despite being small in size, the micro speaker plays back all medium and high frequencies comprehensively, clearly and powerfully. The 9 x 12.5 cm casing behind a removable, floating mounted grid has a full-grown two-way system with 80 mm mid-tone speaker and 19 mm tweeter; an extremely finely tuned frequency switch ensures the harmonic interplay of these components. The curved front provides better sound radiation than conventional constructions.
An exceptionally linear frequency response is achieved in conjunction with the active filtering of the subwoofer’s multi-channel amplifier, marking new standards in the field of multimedia speakers.
The CE 20 FCR includes a matching table stand, but it can also be attached to the wall and swivelled horizontally/vertically using the optional Shortlock wall bracket. Attaching the speaker to the separately available M 50 P stand allows it to be placed freely in the room.
|Continuous power handling (IEC - Long Term)||60 Watt|
|Peak power capacity (IEC - Short Term)||100 Watt|
|Sensitivity (2.83 V / 1 m)||84 dB|
|Impedance||4 - 8 Ohm|
|Frequency range from/to||150 - 20.000 Hz|
|Miscellaneous||Linear frequency response through active filtering by subwoofer unit|
|Tweeter (number per enclosure)||1|
|Tweeter (diameter)||19.00 mm|
|Midrange driver (number per enclosure)||1|
|Midrange driver (diameter)||80.00 mm|
|Midrange driver (material)||Cellulose|
|Enclosure material||ABS plastic|
|Enclosure surface||Laquer, high gloss|
|Removable front cover||Yes|
|Net internal volume||0.70 Litres|
|Diameter of the stand screw threads||6.00 mm|
|Wall mounting brackets||Yes|
|Terminal clamps||Push terminals|
|Maximum cable diameter||2.00 mm|
|Suitable for AV receiver||Yes|
“Excellent wireless audio signal with harmonic and dynamic sound”
+ Very good wireless signal transmission
+ Subwoofer with high precision
+ Incredible power
+ Chic design
+ Fair price
Level stability: 9/10
+ top workmanship
+ sufficient power for larger rooms
+ clear 2.1 sound
+ powerful and dynamic bass
+ good level stability
+ remote control included with delivery
+ plug & play USB transmitter including USB extension cable
+ timeless design
Overall assessment: 9/10
With the sub-woofer turned on, your music can be wirelessly transmitted up to 20m. Two tiny speakers are also included, but you`ll need your own two-core speaker cables to connect them. Sound quality is fantastic, with adjustable bass levels that shook our test room, and you also get a remote control."
Downloads & support
This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.
A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.
A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.
Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.
B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.
- Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable
- If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)
- If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
You can check the basic noise level by connecting a signal, via a cinch cable, from an external source that is guaranteed to be good quality – such as a music CD e.g. on a portable CD player – to the Aux L/R input on the subwoofer. If all of the satellites are now playing noise-free, it is because they weren't receiving the right signal before. Either the cinch cable is defective (try swapping them around) or the output of your source appliance is not producing an adequate signal.
However, if you continue to hear increased noise on this channel there is possibly a fault in the Concept F. Please check which satellites are affected by changing the satellites around and to find out whether the satellite or the subwoofer electronics are producing excessive noise. If the fault "moves" with the satellite the satellite is the problem. On the other hand, if the hissing remains on the same channel, the subwoofer amplifier electronics are the cause.
If you can still hear the crackling, please check which satellites are affected by swapping them around and to find out whether the satellite or the subwoofer electronics are generating the excessive crackling. If the "fault" moves with the satellites, the satellite is affected. The subwoofer amplifier electronics may be responsible if you can still hear the crackling.
The colours of the outputs and the types of signals transferred at each output differ from sound card to sound card. Please refer to the sound card manual. The Teufel system then reproduces the surround signal decoded by the sound card.
The five satellites are connected directly to the speaker clamps on the subwoofer, using the speaker cable supplied. Strip and split the ends of the speaker cable to do so. Speakers and amplifiers have corresponding [+] and [−] clamps. The [+] cable of the speaker cable is marked with a stripe. It is important to observe the correct polarity when connecting the speakers: the plus pole of the speaker connects to the plus pole of the amplifier and the minus pole of the speaker to the minus pole of the amplifier.
The system is an extremely good-value, fully active system that performs very well for its class. It has been designed for home cinema use in smaller rooms and for PC use. It should be taken into consideration, especially in fully active operation with sound cards and DVD players, that a PC speaker system cannot fill an entire room with sound, only the area where the user is sitting. This system has not been designed for and is not suitable for long-term use at very high volumes.
If the system is operated when the volume is too high, the safety cut-off in the power pack may be activated. This cut-off switch is required for safety reasons and prevents the power pack, the power amplifiers and the speakers from sustaining damage. If this cut-off switch is activated, it means that the system has reached its performance boundaries.
Our problem-solving tips:
• Position the system speakers closer to where you are sitting. Then much less power will be needed for loud sound reproduction.
• Use an AV Receiver that will supply the satellites with power. This takes the pressure off the power pack and the power amplifiers of the system.
However, a fault cannot be ruled out if the system switches off at low volumes in rooms of 20 m² or smaller.
We are unable to authorise additional active cooling of the power amplifier. It no longer corresponds to the specifications for the operation of our products. Failures caused by additional active cooling can clearly be attributed to negligent action by the user. As operation with active cooling has a direct effect on the function of the product, it voids all warranty claims.
The other four inputs on the subwoofer do not need to be occupied (= RCA cable disconnected). With this connection plug arrangement of front In L/R, the Concept E Magnum Power Edition amplifier activates all satellites and the subwoofer through internal distribution. If the subwoofer and all five satellites now play correctly via a directly connected CD player, the Concept E Magnum Power Edition was not receiving the correct signal before. Either the cinch cable is defective (try exchanging it) or the output of your source appliance is not producing the correct signal.
If you continue to experience unwanted noise/individual malfunctions, there is possibly a defect in the Teufel system.
Speakers and amplifiers have corresponding [+] and [−] clamps. The [+] cable of the speaker cable is marked with a stripe. It is important that the polarity of the speakers is identical when they are connected: the positive pole of the speaker connects to the positive pole of the amplifier and the negative pole of the speaker to the negative pole of the amplifier. Connecting the cables with the incorrect phases can result in thin sound, weak bass and reduced stereo characteristics. For multichannel surround systems, it is also important that all speakers are connected with the correct polarity in order to ensure the right three-dimensional atmosphere and the correct alignment of the sound.
If your notebook only has a single 3.5 mm stereo jack output, connect it using a 3.5 mm mini jack cinch Y adapter cable to the front input "In R/L" on the subwoofer.
Thanks to the integrated "Upmix" switch in the Concept E 2/ E Magnum / Motiv 5 / Concept F, the 4 satellite speakers play back a stereo signal and the centre speaker and the subwoofer each play back a mono signal. This admittedly does not sound as perfect as Dolby Digital, but does sound better than pure stereo playback.
You will still have the chance later on to operate your speaker using a convertible external 5.1-capable sound card, in order to experience the full pleasure of Dolby Digital and DTS.
Different companies, such as Creative, Terratec, Toshiba, ESI/Audiotrak and M-Audio, offer solutions for connection to the PCMCIA port or via USB or FireWire.
They can otherwise be mounted to the M 50 P speaker stands, which are available for purchase as an accessory.