- Slender soundbar with Bluetooth, perfect for any living room
- Redesigned wireless subwoofer perfectly supports movies, games & music with deep, rich bass
- Connections include: HDMI, Bluetooth, NFC, otpical + amalog inputs
- Decodes Dolby and DTS, virtual surround algorithm creates an immersive soundstage
- 8 drivers plus subwoofer guarantee impressive home cinema sound
- Complete all-in-one system: No AV receiver required
Overview of our technologies
The Cinebar 11 hits all the right notes with a slender, elegant design and powerful sound. Just 8 cm high, the Cinebar along with its handy wireless subwoofer won’t get in the way of your living room interior. Instead, the system places the emphasis where it belongs: The sound.
The Cinebar 11 is equipped with Bluetooth for effortlessly streaming high-quality music from smartphones, tablets and PCs. An HDMI input and output make it possible to easily connect the sound system to your TV. HDMI ARC support means a single HDMI cable is all you’ll need. HDMI CEC makes it possible to control the system with your existing TV remote. Alternately, the audio signal can be fed to the system via optical or analog input.
The subwoofer is controlled wirelessly. Audio transmission is lossless and without delays. You only need one cable connection.
There is a tuner and bass reflex tube on the underside of the device. The bass reflex system allows for deep, strong bass even from such compact dimensions.
- power cable
- AAA battery
- Cinebar 11 Soundbar
- T 6 Subwoofer
- Remote Control CB 11 RC
|Continuous power handling (IEC - Long Term)||25 Watt|
|Peak power capacity (IEC - Short Term)||50 Watt|
|Sensitivity (2.83 V / 1 m)||83 dB|
|Maximum sound pressure level||96 dB/1m|
|Frequency range from/to||200-20000 Hz|
|Crossover frequency internal switch||3000 Hz|
|Tweeter (number per enclosure)||2|
|Tweeter (diameter)||20.00 mm|
|Tweeter (material)||Coated cellulose|
|Midrange driver (number per enclosure)||6|
|Midrange driver (diameter)||44.00 mm|
|Midrange driver (material)||Coated cellulose|
|Enclosure surface||Matte lacquer|
|Net internal volume||1.20 Litres|
|Keyhole plate mounted||Yes|
|Audio inputs- HDMI||Yes|
|Audio inputs- HDMI||1|
|Digital inputs optical||1|
|Stereo jack 3.5mm - in||1|
|Miscellaneous||Virtual Surround Sound|
|Amplifier technology||Class D|
|Power output capacity impulse (peak) Satellite||50 W|
|Power output capacity sinus (RMS) Satellite||40 W|
|Standby-Power consumption||0.40 watt|
|Maximum power consumption||60 watt|
|Storage for settings when disconnected||Yes|
|Miscellaneous||The height with table stand is 7.40 cm|
|Enclosure type||Bass reflex|
|Maximum sound pressure level||104 dB/1m|
|Frequency range from/to||33 - 200 Hz Hz|
|Woofer (number per enclosure)||1|
|Woofer (diameter)||165.00 mm|
|Woofer (material)||Coated cellulose|
|Enclosure type||Bass reflex|
|Enclosure surface||Matte laminate|
|Equalisation openings (pos.)||Bottom|
|Net internal volume||20 Litres|
|Miscellaneous||Subwoofer receives audio signal wirelessly|
|Lowest frequency (-3 dB)||33 Hz|
|Power output capacity impulse (peak) Bass||90 W|
|Power output capacity sinus (RMS) Bass||60 W|
|Power supply voltage||230 Volt volts|
|Standby-Power consumption||0.40 watt|
|Maximum power consumption||120 watt|
See full review at gamezoom.net/artikel/Teufel_Cinebar_11_Test_Review-38228-0
"Speech intelligibility was clear and natural as in the first test."
"In the stereo playback [...] the Cinebar impresses with its surprisingly large soundscape and bright high-tones."
See full review at pc-magazin.de/video-magazin
See full review at techtest.org/die-teufel-cinebar-11-2016-im-test
"Those who value elegant, unusual design and good workmanship are well served with the Cinebar 11 from Teufel. Every critic will be won over by the tonal quality and devilishly good sound. Whether within one’s own four walls, for a party or for home cinema: The soundbar does the job.”
You can read the entire test review (in German) at www.techniksurfer.de
"The system can digest stereo, Dolby Digital and DTS signals. The surround mode ensures a good 3-dimensional sound image and transports the viewer into the events of the movie. When it comes to the sound, the compact soundbar can deliver a big performance. The mid and treble ranges play very cleanly and dynamically even at raised levels. In this way, not only movie soundtracks but also music in stereo is a true pleasure with the Cinebar.”
"All the while, the performance in the bass range is impressive. The subwoofer does its job well. It doesn’t just push out the bass deeply and loudly but also with precision into the living room.”
"The Teufel Cinebar 11 comes with a full-fledged soundbar. Together with a complete feature set, all necessary connections and – above all – the mature sound, the price / performance ratio is positively sensational. Connections and controls are child’s play and thanks to the wireless subwoofer, the amount of work required to cable the system is minimal.”
You can read the entire test review (in German) at hifitest.de
"[After turning on the TV], the Teufel Cinebar 11 turned itself on in really a fraction of a second.“
"The sound was played back very clearly and distinctly. The subwoofer does its job well and unexcitedly in the background.“
"All-in-all the Teufel Cinebar 11 has a very balanced and pleasant sound. The surround function is supposed to create a “virtual surround” effect from a 2.1 system. The result when this function has been activated is truly astonishing. The sound seems much more dimensional and appears to truly be coming from different directions.”
Teufel Cinebar 11 Conclusion
"[T]he Teufel Cinebar 11 is a well executed system for the simple and space-saving improvement of television sound. Ease of use and a balanced sound make this set’s performance a success […]. Above all, the clear and precise vocal playback is to be commended. The Bluetooth interface with NFC synchronization is a cool and really easy to use extra that enhances the overall positive impression.”
To read the entire test review (in German):
"Aside from stero sound, the Teufel device also masters surround sound simulation. […] The loudspeakers have a very balanced and clean sound – far better than television audio. The forward radiating dispersion also enhances speach intelligibility. The maximum volume is considerable. The soundbar is also well suited for larger rooms and for listening to music. This it can receive via Buetooth - from smartphones, for example.“
"Great sound from a slender loudspeaker bar: For 300 Euro, the Cinebar 11 is hard to beat.“
"[...T]he Teufel solution [employs] four sensible methods: Eight loudspeaker drivers, a display plus two HDMI connections [...] enable this inexpensive system to make a big impact. The typically Teufel, solidly constructed active subwoofer is connected wirelessly.“
2Even the details are right: The developers placed the AUX input for [...] mobile players in an easy-to-reach position next to the control buttons located on the top.”
"Voices [...] come across clearly and with little colouration. In addition, the system offers an imposing low range that offers substance and clarity in equal measure. [...] Music recordings in stereo evinced a proper dynamism [...]. Compared to the two channel playback of other soundbars, the Cinebar has a pleasantly large soundstage and fine, lively highs. The voice playback also earns it praise. “
"The sub receives bass signals wirelessly from the Cinebar and can be positioned either horizontally or vertically. The integrated amplifier supplies it with 60 watts.”
"The Teufel is remarkably easy to use. The remote features a button for all important functions including source selection [...]. The surround mode creates a good, 3-dimensional sound image and transports the viewer into the action. In terms of sound, the compact soundbar knows how to deliver. The mid and upper ranges play very cleanly and dynamically, even at higher levels. In this way, not only are movie soundtracks fun, but music in stereo is a real enjoyment with the Cinebar. The performance in the bass range is impressive. The subwoofer does its job very well and pushed the bass [...] into the living room with precision.“
"With a complete set of features, all the necessary connections and – above all – a full sound, the price/performance ratio is really sensationally good. Connecting and controlling the system is child’s play. Thanks to the wireless subwoofer, the work involved in connecting the cables is minimal.”
"Setting up the system is quickly and easily accomplished […]. And it’s at least as easy to wirelessly connect the soundbar to a smartphone or tablet via Bluetooth […]. Along with an optical input, […] a 3.5 mm stereo input is at one’s disposal. In addition, the Cinebar offers an HDMI input and output.”
"The Cinebar is at home with […] film sound […] and offers […] a very pleasant sound image. The Cinebar is able to fill the soundstage it creates regardless of genre, […]. If there are atmospheric effects, then one hears them with the Cinebar.”
"[T]he Cinebar [can] really perform, especially when it's a matter of rendering large dynamic differences […]. Not only is the separate subwoofer to be praised, but above all the collaboration between the soundbar and the subwoofer.”
"The soundbar’s clarity and ability to differentiate, even with very dynamic acoustic material, is very strong. [T]he virtual surround sound [was] very convincing […]. The Cinebar was able to preserve these positive qualities at even louder volumes.“
[T]he Cinebar 11 […] completely won us over with its clear sound supported by a wireless subwoofer that makes it a successful and above all a very affordable alternative for living rooms in which there is not enough space for a larger system.
You can read the entire test review (in German) here:
This soundbar scores points [...] with an attractive look: A perforated metal grille [...] protects from damage; Thanks to a matte black surface, finger prints and reflections from the screen are prevented. It becomes apparent how little space the soundbar takes up when it is set [...] upon a surface. Wall-mount brackets and recesses for connections allow it to be hung on a wall. The controls benefit from a light coloured display that can be switched off if needed.
During the listening test, the Teufel surprised us – unusual for such a small transducer [...]. The bass reflex sub plays [...] cleanly and with a lot of pressure. The 30 Hertz bass delivered effortless playback which lent the overall sound a fullness and maturity. The soundbar reproduced the mids and the highs transparenty and without colouration. The device is characterized by a broad dispersion from top to bottom, while the mids become increasingly softer as one moves to either side of the centerless soundbar. The optional surround mode can expand the stereo panorama [...]
For a low price, Teufel delivers big sound that takes up relatively little space with the Cinebar 11. Since both the feature set and workmanship were top, we’re categorizing it as a price recommendation.
You can read the entire test review (in German) here:
"[...] Przy wysokości zaledwie 5,4 cm, soundbar jest bardzo płaski. Można go łatwo umieścić pod telewizorem i nie będzie zasłaniał obrazu. W razie potrzeby, fani kina domowego mogą również przymocować soundbar do ściany za pomocą zintegrowanych uchwytów. [...]"
"Spośród wszystkich cech, warto wspomnieć interfejs HDMI. [...] Panel dźwiękowy posiada do dyspozycji również cyfrowe optyczne wejście oraz analogowe 3,5 mm gniazdo stereo. Ci, którzy nie lubią się z kablami, będą bardzo zadowoleni z bezprzewodowego połączenia z urządzeniami źródłowymi przez Bluetooth i NFC."
"Wraz z soundbarem, otrzymujesz w zestawie aktywny subwoofer. Ten łączy się płynnie z Cinebar 11. Przycisk parowania z tyłu urządzenia pozwala źródłu basu łatwo i bezprzewodowo połączyć się z soundbarem."
Komponenty i dźwięk
"Szczelna obudowa Cinebar 11 skrywa dwa tweetery [...]. W połączeniu z sześcioma driverami średniotonowymi, [...]dźwięk, który wydobywa się z głośnika podbija nasze serca. To spore osiągnięcie, zwłaszcza wziąwszy pod uwagę kompaktowe wymiary urządzenia. Trójwymiarowość dźwięku nie pozostawia nic do życzenia, a porównanie pełnowymiarowym systemu dźwięku przestrzennego po prostu nasuwa się samo. Dialogi brzmią czysto i są łatwe do zrozumienia. Oddzielenie głosu i innych efektów następuje bezproblemowo. Łatwo zauważysz nawet subtelne efekty. Wewnątrz aktywnego subwoofera znajduje się driver niskotonowy o średnicy 165 mm. Subwoofer harmonijnie współgra z panelem dźwiękowym i zapewnia mocny i potężnie brzmiący bas. [...]"
[...] Z głośnika wydobywa sie niezwykły dźwięk, a dzięki subtelnemu designowi, soundbar łatwo zmieści sie w każdym salonie. Cinebar 11 jest idealnym wyborem dla miłośników kina domowego z ograniczoną przestrzenąa i jako taki, nie pozostawia nic do życzenia.
You can read the full review (in German) here:
Along with a HDMI socket with audio feedback channel, Teufel – like its competitor Panasonic - provides an additional HDMI input for a Blu-ray player or game console. Optical and coaxial connection options are also available. As an additional feature, there’s a Bluetooth interface as well as virtual surround. As we have come to expect from Teufel, no audio cables are included with delivery, but it did come with a practical wall mount. In terms of sound quality, the Cinebar impressed us the most out of all the test devices.
In spite of a relatively small size, the subwoofer delivered the most powerful and dynamic bass performance of all. A room filling stereo image with crystal clear highs and a all-around balanced character completes the excellent listening impression. You can, by the way, do without the surround effects here as well.”
Plus points: Slender design / high-quality workmanship / impressive, powerful soundstage / also suitable for music
The connection possibilities are comprised of an HDMI input, an HDMI output, an optical digital input, a 3.5 mm analogue stereo jack input and, as a wireless option, Bluetooth with NFC. The Cinebar 11 has a very pleasant appearance. Teufel opted out of the high-gloss look in favour of a matte synthetic. The front drivers are positioned behind precisely fitted metal grilles and enhanced with a chrome ring – a nice detail that immediately increases the perceived value of the workmanship.
The active subwoofer is wirelessly connected [...] 90 watts is given as the subwoofer channel’s maximum power capacity. The continuous power capacity is 60 watts. The bass driver can produce frequencies from 42 t0 200 Hz and operates according to a bass reflex principle.”
"Acoustically, it’s, of course, not so easy to pull the maximum from a very compact enclosure. We’re therefore eager to see whether Teufel managed to achieve a rich, lively sound. We listened to the Blu-ray disc “Indiana Jones and the Kingdom of the Crystal Skull” starting with the second chapter. The gigantic hangar door opens with a powerful drone. The active subwoofer does a very good job here and ensures a respectable volume.
Ideally, the room should measure about 12 by 20 square metres. The Cinebar 11 unfurls an astonishingly rich and intense sound in this room size, and higher levels are no problem. The musical score was well integrated; the collaboration between the subwoofer and the soundbar is perfectly executed. The sound seems full, but is at the same time precise and dynamic.
When the movie really heats up [...], the Cinebar 11 comes into its own: The punches and gun shots are penetrating, the vehicle sounds and crashes are not only impressive, they reach the listener with clearly differentiated levels. Due to the broad horizontal dispersion angle, it’s no problem to include a number of listeners in the enjoyment of the Cinebar 11’s sound quality.
The virtual surround sound function is a success. It creates a large addition of realistic dimensionality, without damping the tone or making it sound tinny. Spatial widths as well as depth are considerably – and successfully – enhanced.
The Bluetooth connection is easily established even when NFC is not used. One simply presses the “BT Pairing” button on the remote and the Cinebar 11 is ready to connect. If a smartphone is Bluetooth enabled, it takes less than 30 seconds for the connection to be established.
"Late bloomer: Teufel’s first flat soundbar comes onto the market just in time for the Christmas season. Good workmanship, a reasonable price, and equipped with all the modern, in-demand features, the Cinebar 11 set is doubtlessly a good deal. The sound evinces clarity, powerful bass, and dimensionality.
Like a ‘Berlin hip flask’: Chic, fully loaded, and powerful - the Cinebar 11 plays into the hearts of consumers.”
Read the full test review (in German) at areadvd.de
Downloads & support
This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.
A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
While this is essentially correct – the soundbar and subwoofer do automatically pair with each other when switched on – this only happens after an initial setup procedure. To pair the two devices for the first time, please proceed as follows:
1) Connect the soundbar and subwoofer to power.
2) Press the “Menu” button on the Cinebar 11’s remote control. Next, go to the menu option “WS” and confirm your selection by pressing the “OK” button.
3) Press “OK” again in order to access the menu option “LINK” and then “START”. The word “SEARCH” will appear on the Cinebar 11’s display.
4) Next, press the button on the back of the subwoofer marked “Pairing”.
5) Both devices are now connected. Once the status “OK” appears on the soundbar’s display, both devices will be permanently connected. The pairing procedure now takes place automatically whenever both devices are turned on.
1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.
A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.
Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.
B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.
- Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable
- If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)
- If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
The corresponding setting in the speaker set-up must be adjusted individually for each source for many receivers, however, e.g. for CD playback only front without woofer, and front speakers plus woofer for Dolby Surround video playback.
To make sure the subwoofer switches on and off correctly in automatic mode, (to be selected on the corresponding switch of the subwoofer, such as "Auto / On / Off"), we recommend turning the level control on the subwoofer to 1/3 or perhaps to 1/2 and increasing the output level for the sub in the receiver's speaker set-up – sometimes up to the maximum (+10 dB or +12 dB). The subwoofer should then work perfectly.
The maximum position of the output level in the speaker set-up of the AV Receiver is obligatory for some of our models (e.g. the Concept S subwoofer).
You can connect it like a standard speaker system: the five satellites via speaker cable to the corresponding speaker outputs front R/L, rear R/L and centre of the AV Receiver/amplifier and the subwoofer from the front R input via a mono-RCA cable to the Sub Out output on the A/V Receiver/amplifier.
The auto on/standby switch only responds when the front R input is being used! The subwoofer also receives the full subwoofer signal via this channel.
If the AV Receiver/amplifier has preamplifier outputs for all channels (front R/L, rear R/L, centre and subwoofer), the Teufel set can also be connected via three RCA cable pairs to the subwoofer and the satellites via speaker cables to the subwoofer. However, we recommend using the first version.
Separate the direct connection by a grounding filter for the antennae cable that is created for it - for instance, the Teufel modell sheath current filter AC 9022 ED. Alternatively, you can use a galvanic separation filter that is looped into the connection between the subwoofer and AV Receiver.
The hum disappears if the antennae cable is separated from the Receiver/Tuner/TV. First try the grounding filter, otherwise the galvanic separation filter.
Placement within the straight line between both front satellites is ideal - but not precisely in the corner of the room because certain frequency components could be unpleasantly excessive when played back.
The membranes of the satellites should move to the front at the same time as the membrane of the subwoofer bass speaker, because all speakers of the system must vibrate in phase for optimal playback. This means that (provided the connection has the correct polarity) all drivers must move in one direction when the three front speakers receive a pulse (towards the outside or towards the inside).
If the subwoofer is in line with the front speakers, its bass speaker should have the same direction of movement (phase) - the controller on the woofer is set to "0". If the subwoofer is not between the front speakers, but is to the side of or even behind the listening location, its phase length will not match that of the front speakers. That is why the phase of the subwoofer must be changed in such cases.
So much for the theory. In practice, this means: Listen to a loud piece of music with heavy basses and ask a second person to change the phase during playback. The correct setting of the phase switch depends on where the subwoofer is positioned in the room. The position where the bass playback (above all the upper bass range) sounds the fullest is the correct position. Have fun trying it out!
Even though the LED is still illuminated, the subwoofer is in standby mode. This function can be easily checked by slowly increasing the volume at the receiver/amplifier. You will hear a quiet popping noise when the subwoofer activates itself as of a certain level.
If the satellites are not connected directly to the subwoofer but to the AV Receiver/amplifier via speaker cable instead, the subwoofer performance will increase somewhat; the power amplifiers for the satellites have no function. This enables the subwoofer and satellites to play even more dynamically than if the subwoofer still had to provide the satellites with performance.
The technical background: The subwoofer has a large transformer with a specific wattage. This performance is either distributed to the five satellites and the subwoofer, or you receive a higher performance only for the subwoofer.
If the cabling method is easier for you, then you can alternatively connect one subwoofer to the other. You will need two mono cinch cables - one to connect the subwoofer "Pre Out" on the AV receiver/amplifier to the left line-in input of the first subwoofer, and the other to connect the left line-out output of the first subwoofer to the left line-in input of the second subwoofer.
This can be imagined as droning or booming, which occurs during heavy bass movie scenes such as explosions or certain types of music (Jazz, pizzicato bass). The bass absorber is then tuned exactly to this frequency so that only the speakers/subwoofer play back this frequency. The resonance frequency from the room, which would amplify this frequency, is swallowed by the bass absorber.
If you would like to damp more than one frequency (a room usually has three different frequencies: ceilings and floors, front and back and left and right, and its multiple), you will have to set up three absorbers accordingly.
The wattage (e.g. "360 W") printed on the rear of the subwoofer near the mains plug designates the ability of the power amplifier "to pull" a maximum power rating in the specified range at the moment of switching on (those 360 watt stated as an example).
Consequently, the wattage must correspond to at least the sine wave output of the amplifier, as this sine wave output must be permanently available which the power pack must provide as well.
The pulse/music performance of the amplifier, on the other hand, can exceed the wattage, because the short pulses are buffered additionally by the capacitors in the power pack and are not achieved solely through the performance of the power pack.
The wattage for a multi-channel subwoofer can also be below the sine wave output, as the specified sine wave output is not requested from every channel at the same time.
For a 5 x 100 watt sinus power amplifier, for example, each of the five channels is able to implement 100 watt sine. However, not all five channels at the same time! This is also unnecessary, as the same signal is never transmitted across all five channels at the same time, thus requesting the same high sine wave output per channel.
That is why the wattage may be, e.g. 300 watt, even if the sine wave output exhibits 5 x 100 watt (= 500 watt).
The volume of the active subwoofer can be controlled so that you can adapt the relationship between the active bass and treble / mid tones to suit the room.
Use your own senses to judge which settings sound best in your room. This switch is especially useful in stereo mode. On the other hand, multichannel amplifiers often have technologies that adjust the subwoofer volume - so when using a multichannel amplifier the controller should first be set at 0dB.
It is calculated of the sound velocity divided by 2 and divided by the room length [ 340 m/s: 2 : 6 m = 28.3 Hz (=1/s) ] or, more simply: 170 divided by the room dimension (length, width or height). The greatest distance between two parallel walls is taken as first standard value. For a room of 4 x 6 metres, this would be 6 metres. Strictly speaking, you would have to calculate the room resonance frequency for further parallel walls (for the 4 metres and for the ceiling height).
Overlaying resonances are also possible if the room dimensions are very close to each other. (2.8 metres high, 3 metres wide and 5.6 metres long). The resonance at 2.8 metres is repeated as multiple (times 2) at 5.6 metres length, the resonance of the 3 metres width is close to the resonance of 2.8 metres. It would resonate strongly here at 30 Hz, 56 Hz, 60 Hz and 120/112 Hz.
Phenomena of resonance frequencies:
• For example, a man with a deep voice speaks in a very small room (2 by 2 metres, 85 Hz). The voice appears to have more emphasis than in another room or out of doors. As soon as a woman speaks, the voice will sound just the same as in another room.
• The voice of a woman or that of a small child will cause glass to shatter. The voice strikes exactly the tone that corresponds to the resonant frequency of the glass. The glass resonates so strongly that it shatters (refer to the movie "The Tin Drum").
• A group of soldiers march across a bridge in cadence. The equal movement causes the bridge to vibrate so much that it collapses. That is why no one marches across bridges in cadence.