Cinebar 21 iT
- 8 week trial
- Up to 12 year guarantee
- Free & easy returns
- Slender 200 watt soundbar set including the iTeufel Dock v3 + cables!
- iTeufel Dock v3 is a dock station for your iPhone/iPod and is directly connected to the Cinebar 21
- Wonderful full room sound thanks to Dolby Virtual Speaker technology - better speech intelligibility, cleaner music and more amazing bass
- Connections for 3 devices such as TVs, DVD players, Blu-ray players, etc.
- Ultra-compact subwoofer with its own 120 watt amplifier - no other amps are needed
- Recommended for rooms up to 25 sqm
Overview of our technologies
If your television's sound is as flat as your screen, here's your solution. The Cinebar 21 is compact, user friendly, and very powerful. Enjoy great sound with fewer cables.
The Cinebar soundbar adds an entirely new dimension to television and movie sound as well as music. You'll immediately feel the difference between the Cinebar and conventional television loudspeakers.
Integrated Dolby Virtual Speaker Technology uses an ingenious algorithm to channel the energies of 6 internal drivers. The result is an amazing feeling of pure sound immersion from one sleek soundbar that comes very close to the sound produced by a larger and more expensive surround sound system.
The optimally tuned tweeter and midrange driver produce a very accurate midrange and crystal clear highs for enhanced speech intelligibility and amazingly dynamic movie sound. The Cinebar 21 set also delivers music playback in a very natural and balanced stereo. With a total power output of 200 watts, rooms up to 25 m² can be easily filled with sound.
The included subwoofer produces an impressively clear and powerful bass. With the 120 watts of performance, this handy little sub delivers sound to spare, and its attractive glossy front and compact dimensions won't look out of place in even the poshest interiors.
Sound at an optimum level, easy to use and inexpensive - the iTeufel Dock v3 connects your iPod or iPhone to the source you need for a sound you'll hardly believe.
iPod or iPhone
Doesn't matter whether you have an iPod Nano, an iPod classic, an iPod touch or an iPhone - just stick your device in the dock and enjoy your music.
Once you're plugged in and set up, you're recharging even while you listen to your favourite tunes.
Once you connect the iTeufel Dock v3 via USB to your PC or Mac you've got everything ready for a quick sync-up.
Video playback? Not a problem
The iTeufel Dock v3 has a composite and an s-video output for any video you need to stream. Just connect your TV to your iPod and you're ready for Home Video night.
Easy to use, easy on your iPhone or iPod, too - this is the iTeufel Dock v3. Have you tried it yet?
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
iTeufel® is a registered trademark of Lautsprecher Teufel GmbH
- Soundbar Cinebar 21
- connecting cabel for Cinebar 21
- remote control for CB 21 SB
- Activ Subwoofer US 5106/1 SW
- iTeufel Dock v3
- Remote Control iTeufel Dock v3
- 1,5 m Y Adapter AC 5015 AP
The Cinebar 21 is equipped with a 2-way system with two tweeters and four midrange drivers. An integrated amplifier fires the system with 2 x 40 watts. Two digital inputs (optical and coaxial) and an additional analogue input provide plenty of connections for your playback devices.
The decoder section processes Dolby Digital/DTS in-coming signals from digital sources. These are converted for playback via stereo devices and generate a virtual surround sound effect thanks to Dolby Virtual Speaker technology. Three different playback modes are available: Stereo, wide, and reference. A lip sync function ensures utterly synchronous tone and picture.
A handy, ergonomically designed remote makes it easy to access the soundbar's most important functions. The current status can be easily read on the large display with adjustable brightness.
The Cinebar 21 soundbar can be directly wall mounted. An additional stand is included with delivery for placing the soundbar on a shelf.
|Enclosure material||ABS synthetic|
|Net internal volume||8.20 Litres|
|Digital inputs coaxial||1|
|Digital inputs optical||1|
|Cinch input stereo||1|
|DTS||DTS 5.1 / DTS 2.0|
|Dolby Digital||Dolby Digital 2.0, Dolby Digital 5.1 AC-3|
|Dolby Pro Logic II||Yes|
|Dolby Virtual Speaker||Wide / Reference / Off|
|Amplifier configuration||Class D|
|Power output capacity impulse (peak) Satellite||50 W|
|Power output capacity sinus (RMS) Satellite||40 W|
|Power supply voltage||220-240 volts|
|Standby-Power consumption||0.50 watt|
|Maximum power consumption||100 watt|
|Mains cable - IEC connector (non-heating device)||Yes|
|Storage for settings when disconnected||Yes|
|Audio-Digital-Analog-Converter||192kHz / 24 Bit|
Ein Frontschalter ermöglicht die direkte Inbetriebnahme. Die Empfindlichkeit des Standby-Modus ist auf der Rückseite regulierbar. Vier Resonanzdämpfer-Füße gewährleisten den sicheren Stand und eine Entkoppelung vom Boden.
Der US 5106/SW mit schwarz glänzender Frontpartie ist nicht separat erhältlich.
|Woofer (number per enclosure)||1|
|Woofer (diameter)||160.00 mm|
|Woofer (material)||Cellulose, coated|
|Enclosure type||Bass reflex|
|Enclosure surface||Black, high gloss|
|Power output capacity impulse (peak) Bass||130 W|
|Power output capacity sinus (RMS) Bass||120 W|
|3.5 mm jack socket - out||1|
|Video outputs- composite||Yes|
|Video outputs- S-Video||Yes|
|iPod / iPhone||Yes|
|Power supply voltage||5 volts|
|Standby-Power consumption||0.36 watt|
|Maximum power consumption||10 watt|
|Storage for settings when disconnected||Yes|
|iPod touch 2G||Yes|
|iPod touch 2G 32GB/64GB||Yes|
|iPod touch 3G||Yes|
|iPod touch 4G||Yes|
|iPod nano 2G||Yes|
|iPod nano 3G||Yes|
|iPod nano 4G||Yes|
|iPod nano 5G||Yes|
|iPod nano 6G||Yes|
Downloads & support
This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.
A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.
Tauschen Sie die neben dem Netzschalter befindliche Sicherung aus. Falls die Power-Diode danach nicht leuchtet, wenden Sie sich bitte an unseren Service. Falls die Power-Diode danach leuchtet, aber kein Ton zu vernehmen ist, verfahren Sie bitte wie unter Punkt 2. beschrieben.
2. Falls die Power-Diode leuchtet:
Drehen Sie den Pegelregler Level am Subwoofer auf »Minimum«, ziehen das Subwoofer-Cinchkabel am Verstärker ab, drehen Level vorsichtig hoch und berühren den Cinch-Heißleiter des Cinch-Kabels (innen) mit dem Finger. Ist nun ein Brummen oder Knacken zu hören, liegt der Fehler beim Receiver oder seinen Einstellungen. Bleibt der Subwoofer stumm, wenden Sie sich bitte an unseren Service.
1. Remove the RCA cable from the input on the subwoofer. If the hum is no longer heard, go to point B. Otherwise, follow point A.
A. Attach the net cable of the subwoofer to another electricity outlet (i.e. Kitchen/Bathroom/Bedroom). If the subwoofer still hums, get in contact with our Support team.
Should the hum no longer be there, the disruption was a problem in your power supply, which can, for instance, be caused by dimmers or chargers. To find out where the disruption is, unplug all your devices and work back from there. As soon as the hum is heard, you now know your source of the disruption.
B. In your case, the "ground hum" is responsible for the disruption. Please proceed as follows to discover your source.
- Disconnect the cable or satellite port from the TV Receiver and check if the hum disappears or not. If it does, you can use a sheath current filter for the cable outlet to prevent this. For example, the sheath current filter AC 9022 ED. If you have a satellite connection, connect the Satellite Receiver to the optical cable playback source - Teufel Optical Digital Cable
- If this reason can be excluded, separate all devices from the AV Receiver one at a time until the hum stops. The last connected device is then your hum source and should be separated from the others using a galvanic separation filter (found in a retail shop)
- If this doesn't work, get in contact with us once again so that we can give an individual, helpful response.
The corresponding setting in the speaker set-up must be adjusted individually for each source for many receivers, however, e.g. for CD playback only front without woofer, and front speakers plus woofer for Dolby Surround video playback.
To make sure the subwoofer switches on and off correctly in automatic mode, (to be selected on the corresponding switch of the subwoofer, such as "Auto / On / Off"), we recommend turning the level control on the subwoofer to 1/3 or perhaps to 1/2 and increasing the output level for the sub in the receiver's speaker set-up – sometimes up to the maximum (+10 dB or +12 dB). The subwoofer should then work perfectly.
The maximum position of the output level in the speaker set-up of the AV Receiver is obligatory for some of our models (e.g. the Concept S subwoofer).
You can connect it like a standard speaker system: the five satellites via speaker cable to the corresponding speaker outputs front R/L, rear R/L and centre of the AV Receiver/amplifier and the subwoofer from the front R input via a mono-RCA cable to the Sub Out output on the A/V Receiver/amplifier.
The auto on/standby switch only responds when the front R input is being used! The subwoofer also receives the full subwoofer signal via this channel.
If the AV Receiver/amplifier has preamplifier outputs for all channels (front R/L, rear R/L, centre and subwoofer), the Teufel set can also be connected via three RCA cable pairs to the subwoofer and the satellites via speaker cables to the subwoofer. However, we recommend using the first version.
Even though the LED is still illuminated, the subwoofer is in standby mode. This function can be easily checked by slowly increasing the volume at the receiver/amplifier. You will hear a quiet popping noise when the subwoofer activates itself as of a certain level.
If the satellites are not connected directly to the subwoofer but to the AV Receiver/amplifier via speaker cable instead, the subwoofer performance will increase somewhat; the power amplifiers for the satellites have no function. This enables the subwoofer and satellites to play even more dynamically than if the subwoofer still had to provide the satellites with performance.
The technical background: The subwoofer has a large transformer with a specific wattage. This performance is either distributed to the five satellites and the subwoofer, or you receive a higher performance only for the subwoofer.
If the cabling method is easier for you, then you can alternatively connect one subwoofer to the other. You will need two mono cinch cables - one to connect the subwoofer "Pre Out" on the AV receiver/amplifier to the left line-in input of the first subwoofer, and the other to connect the left line-out output of the first subwoofer to the left line-in input of the second subwoofer.
The volume of the active subwoofer can be controlled so that you can adapt the relationship between the active bass and treble / mid tones to suit the room.
Use your own senses to judge which settings sound best in your room. This switch is especially useful in stereo mode. On the other hand, multichannel amplifiers often have technologies that adjust the subwoofer volume - so when using a multichannel amplifier the controller should first be set at 0dB.