The success story of our exclusive sound continues with our refined and improved flagshap stereo set, the Ultima 800 Mk II.
Pure acoustic power
With high end materials, refined construction details and the best possible sound, the Ultima 800 Mk II plays in a league that is normally dominated by much more expensive speakers.
We've improved on all high performance drivers and crossovers contained in this fantastic pair. The result is significantly reduced distortion, a straightforward frequency response, and an improvement over the entire frequency spectrum. The Ultima 800 Mk II is an absolutely neutral, powerful sound machine.
Special feature: Passive membrane
With the Ultima 800 Mk II, the low frequency range works on the underside of the device. Instead of using conventional bass reflex openings, we use four passives in the back and front woofers. Thus a sophisticated solution: extremely deep, rich bass, very precise reproduction and absolutely no flow generated noise.
Clever bass alignment
Thanks to its ability to alter the bass response in four distinct levels ranging from a very light bass down to an extremely maximum bass, this sound will not only fit your needs, but it also fits within every room size and amplifier. The Ultima 800 Mk II is one of the most versatile and most flexible speakers in its class.
With a housing volume of over 43 liters and a height of almost one meter, the Ultima 800 Mk II settles for nothing less than perfection in its looks, as well as sound. With a glossy white finish and newly modified metal base feet, you'll be impressed with the admiring comments you'll receive - even before you let them listen to it. A special feature: the removable fabric frame is magnetically held in place.
Timeless High End
Universality, practicality and enhanced sound precision are all embodied in the Ultima 800 Mk II. This set sets new standards in the class of affordable high-end speakers and is an investment that pays for itself through the sheer listening enjoyment it brings to your life.
- Floor Speaker UL 800 Mk2
|Peak power capacity (IEC - Short Term)||350 Watt|
|Sensitivity (2.83 V / 1 m)||86 dB|
|Minimum amplifier output power recommended||100 Watt|
|Maximum sound pressure level||104 dB/1m|
|Impedance||4 - 8 Ohm|
|Frequency range from/to||42 - 27000 Hz|
|Crossover frequency internal switch||350 / 2000 Hz|
|Tweeter (number per enclosure)||1|
|Tweeter (diameter)||33.00 mm|
|Tweeter (material)||Special fabric|
|Bass/Midrange driver (number per enclosure)||1|
|Bass/Midrange driver (diameter)||100.00 mm|
|Bass/Midrange driver (material)||Titanium full membrane|
|Woofer (number per enclosure)||6|
|Woofer (diameter)||170.00 mm|
|Woofer (material)||Carbon Rohacell sandwich cone|
|Miscellaneous||Subwoofer: 2x aktiv-drivers, 4x passiv-drivers|
|Enclosure type||Variable passive membrane|
|Enclosure material||22 mm MDF|
|Removable front cover||Yes|
|Net internal volume||43 Litres|
|Miscellaneous||4 passive membranes, 1 front, 3 back|
|Terminal clamps||Screw terminal with bass alignment function|
|Suitable for banana plug||Yes|
|Maximum cable diameter||10.00 mm|
|Miscellaneous||Width base feet: 31 cm|
Downloads & support
This circumstance would drive up the production and storage costs, which would result in a significantly more expensive sales price.
A paint shop in your vicinity will surely be able to repaint the speaker housing to your preferred colour without loss of warranty - after expiry of the eight-week right of return.